User manual

8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
22
 Channel
Select the channel to set. COPY icon can copy the present setting to other channels.
 Enable
Enable/disable motion detection for each camera. Set: On/Off
 Sensitivity
Sensitivity level of motion detection. Set: 1~10. Higher value equal more sensitive.
 Motion Area Setup
Setup by each small square.
Setup Operation
Front Panel & Remote Controller
USB Mouse
Area Selection
[Up/Down/Left/Right]
[Moving Cursor]
Set Detection Area: must set
on none detection
area(Transparent Area)
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
Clear Detection Area: clear the
set detection area: must set on
detection area(Green Area)
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
Return to Upper Menu
[MENU]
[Right Click]
 Record Duration
The duration of the recording after triggered: 10, 20… 60 sec. or off.
 Buzzer Duration
The duration of the buzzer beeping after being triggered: 1, 5, 10, 15, 20, 30 sec.
 Alarm Duration
Alarm out after alarm triggered: 1, 5, 10, 15, 20, 30 sec.
 Event Popup
The Duration of single channel display after being triggered: 1, 5, 10, 15, 20 sec or off.
8.5 Network Setup