User manual

8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
1
WARNING
 Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could
decrease the performance of DVR and damage the machine.
 Do not touch the power plug or case with wet hands as this could result electric shock.
 Do not forcedly bend or put heavy object on power cable as this could result in injury to personal or
equipment.
 Do not operate with damaged power cord or loose electrical outlet as this could result in electric
shock or accident.
 Please use individual power instead of share electrical outlets with other electrical equipment as this
could result in damage or accident.
 Do not attempt to service this DVR by yourself as it may expose you to dangerous voltage or other
hazards. Please refer all service to the qualified servicing distributor.
 Do not open the covers or insert any object into DVR.
CAUTION
 Do not place the machine on an uneven surface or it would decrease the DVR efficiency or malfunction.
 Avoid any shock or bumping of the DVR while recording. Improper handling could damage the system.
 OSD switching between VGA and BNC is automatic.
If you found the monitor is working, but the front panel and USB mouse are locked up.
Press and hold the “fast forward” button on the remote for 5 seconds to switch OSD setting.
CAUTION
Make sure the voltage selector switch is
set to appropriate setting before plug in!