8 Channel H.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual WARNING Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could decrease the performance of DVR and damage the machine. Do not touch the power plug or case with wet hands as this could result electric shock. Do not forcedly bend or put heavy object on power cable as this could result in injury to personal or equipment.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Specification .................................................................................................................................3 Front Panel....................................................................................................................................6 Backplane .......................................................................
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 1. User Manual Specification H.264 8CH DVR (RDVR-H08) General Operation System PTZ Control Senor & Alarm I/O LINUX Built-in RS485, support PELCO-P & PELCO-D, MIKAMI 4in/1out Mouse Control YES Remote Control YES Compatible OS Windows 2000, XP, Vista and 7 Power Supply (power adaptor included) Power consumption Working Temperature Dimension Weight DC 12V (AC100V~240V 50/60HZ) 10 ~ 15 W (exclude HDD) 32℉ ~ 114.8℉ (0℃ ~ 46℃) 8.7”(W) x 11.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 Playback Mode User Manual PLAY / FF / SLOW / FWD / Frame by frame Playback Search Date/time, Event list Local: Playback 8 channels at the same time Multi-Channel Playback Network: Playback 1 channels at the same time Recording Pack Time 5/10/15/20/30/60mins file time selectable HDD Interface supports up to 2TB SATA HDD USB 2.0 external hard drive (Up to 2TB, FAT 32) / Backup USB 2.0 flash drive / USB 2.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Package content RSVA-11001 RSVA-12001 H.264 8CH DVR (RSVR-H08) x 1 H.264 8CH DVR (RSVR-H08) x 1 1/4” CCD IR Camera (RCMR-14CCDIR) x 4 1/4” CMOS IR Camera (RCMR-14CMOSIR) x 4 Slim Cable (82ft./25M) x 4 Slim Cable (82ft.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Front Panel Menu Manual Record/ STOP Step / Pause Play Slow Forward Quad 8 Division Display Under the live viewing mode, press MENU to enter the main menu. Under the menu mode, press MENU to go to the upper menu. Press this button to start recording in live mode. Under the playback mode, press the button to stop the operation or go to upper menu. Under the playback mode, press Step button to enter Play Frame by Frame mode.
Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 2. Backplane 1 USB Mouse Port 2.0 USB Mouse 2 Video In 4/8CH Video Input (BNC) 3 Video Out 1CH Video Output (BNC) 4 Audio Out 1CH Audio Output (RCA) 5 Audio In 6 Alarm 7 DC12V 8 XGA PC Monitor Output 9 LAN RJ-45 Network Connection 10 RS-485 4CH Audio Input Alarm I/O Power Input For Speed Dome Use Alarm I/O Item Point 1: CH1 sensor input. Point 2: CH2 sensor input. Point 3: CH3 sensor input. Point 4: CH4 sensor input.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 3. DVR Installation Connect the camera video output to the DVR video input port with BNC connectors. The camera install coaxial cable is suggested RG59 or above. DVR Network installation Please connect DVR to HUB or router by using RJ-45 network cable and make sure the DVR network indicator LED is on. (Please refer to Network Setup for further network setting information of using static IP, PPPoE or DHCP.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 4. User Manual System Operation There are 3 kinds of DVR control method: front panel, remote control and USB mouse. USB Mouse Operation 1. Quick Menu: Right click the mouse button under the live viewing mode to go for enter into Quick Menu. 2. Left click the mouse button under the main menu to go to the sub-select menu. 3. Left click the mouse button under the select menu to go to the sub-menu. 4. Use the mouse to change the setting. 5.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual The text input of the virtual keyboard is as below: Menu Operation Select character from virtual keyboard Keyin the select character Exit the virtual keyboard Front Panel & Remote Control Operation [Up/Down/Left/Right] [Enter] [MENU] Mouse Operation [Move Cursor] [Left Click] [Left Click]out of selection area Key Description of Virtual Keyboard Delete the previous character Switch to text input Enter key.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Setup Setup Operation Front Panel & Remote Control USB Mouse Select [Up/Down/Left/Right] [Moving Cursor] Confirm Select Setting [Enter] [Left Click] Change the Select Setting [Left/Right] [Left Click] 5. Display Setup There are 3 kinds of screen display mode: Live, Auto Switching and PTZ. DVR. Live Viewing Mode The DVR will go to the live viewing mode after boot up.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Setup Operation Front Panel & Remote Control USB Mouse Select Item [Left/Right] [Moving Cursor] Enter the Select Item [Up/Down] [Moving Cursor] Confirm the Select Item [Enter] [Left Click] Exit [MENU] [Left Click] out of selection area PTZ Please set the speed dome properly before control PTZ. Please refer to PTZ Setup.
8 Channel H.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual mouse to switch to the Search function. Setup Operation Front Panel & Remote Controller USB Mouse Search [Enter] [Left Click] Select Channel [Up/Down] [Moving Cursor] Select Dates [Up/Down/Left/Right] [Moving Cursor] Playback [Enter] [Left Click] Return to Upper Menu [MENU] ] No data: no color, data of alarm trigger: red color, normal record data: green color.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 Enter Select Item Front & Remote Controller [Enter] Select Item [Up/Down/Left/Right] Return to Upper Menu [MENU] Setup Operation User Manual USB Mouse [Left Click] [Moving Cursor] [Right click] or [Left click ] First Page Previous Page Next Page Last Page Mark all the events in this page BackUp 7. List all of recording data and click on one of record data to playback.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Camera Record Sensor Motion Network Log Search Back Up System Setup Operation Front Panel & Remote Controller USB Mouse Select Item [Up/Down/Left/Right] [Moving Cursor] Enter Select Item [Enter] [Left Click] Exit Main Menu [MENU] [Right click] or [Left click ] 8.1 Camera Setup Channel Select one channel to set. Use CopyButton to copy present settings to other channels. Camera Title Set the title of camera.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Type Speed dome model type. Set: PTC-301, PTC-203ST, FUM 626, JG_QG988, FUM 622SD, FUM 628 or off. Please select the correct communication protocol if you enable this setting. Protocol Speed dome protocol. Set: PELCO P, PELCO D, MIKAMI or off. Address Speed dome address. Set: 0~255 Baud Rate Speed dome baud rate. Set: 1200, 2400, 4800, 9600, 19200. Tour Time Speed dome tour time. Set: 5, 10, 15, 20, 25 sec or off.
8 Channel H.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 Record Enable Setup On/Off the channel. Watermark: Insert the words of watermark. 8CH DVR Resolution Setup NTSC Recording Resolution: 720x480 / 720x240 / 360x240. PAL Recording Resolution: 720x576 / 720x288 / 360x288. 8CH DVR Frame Rate Setup Setting of Frame Rate: NTSC: 0-30 frames/sec; PAL: 0-25 frames/sec.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 8CH DVR Quality Setup Setting of recording quality: Values 1-5. The bigger value, the better quality. 8CH DVR Pre Record setting Pre Recording time when motion alarm. Values: 0-10 seconds. Audio On/Off the sound effects. Encode Mode Encoding of channel. Values: VBR or CBR. Record schedule setup Always and Schedule Record.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Schedule Setup Operation Front Panel & Remote Controller USB Mouse Enter Select Item [Enter] [Left Click] Select Channel [Up/Down] [Moving mouse wheel] Select Time&Date [Up/Down/Left/Right] [Click/Drag-draw] Return to Upper Menu [MENU] [Right Click] or [Left Click ] Copy (1) Select source (2) Select target (3) Press COPY icon to copy. 8.3 Alarm Setup 8.4 Channel Select the channel to set.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 Channel Select the channel to set. COPY icon can copy the present setting to other channels. Enable Enable/disable motion detection for each camera. Set: On/Off Sensitivity Sensitivity level of motion detection. Set: 1~10. Higher value equal more sensitive. Motion Area Setup Setup by each small square.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 Mode Set the connection method. Set: Static IP, DHCP, PPPoE. Media Port Port used for stream media. Default is port 9000.WEB Port Port used for web access. Default is port 80. Command Port Port used for settings. Default is port 8000. Mobile Port Mobile phone port (factory default): 15961. IP Address Assigned IP address. Netmask Assigned net mask Gateway Assigned gateway PPPOE/3G PPPoE: Need account and password for PPPoE.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual DNS1 First Domain Name Server, Default : 168.95.1.1 DNS2 Second Domain Name Server, Default :168.95.192.1 DDNS Enable/disable Dynamic Domain Name server. Values: On, Off. DDNS Server DDNS Server, Values: 3322, dyndns, cctvdvr. When using DDNSserver, server name and account/password are required. E-Mail Setting E-MAIL Forward E-mail after alarm triggered. Enable: On/Off SSL Enable the SSL encryption.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Log type Set conditions for searching: type and time range. Log type can be ALL, Alarm, Operation, Motion Detection, and Video Loss. Start/End time Set the search range (Year/Month/Day). Press [SEARCH] to search.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Channel Backup all channels or single channel 1-4/8. Record Type Select all, normal or alarm. Start/End time Select the backup range of time. Press Search to start searching. The record list will be shown if available and follow [Record list] to backup. Storage Device Choose 8.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 Time Setup HDD Display System Information Password Language Audio System Maintenance 8.8.1 8.8.2 Time Setting Date/Time Select by using virtual keyboard. Date Format Setup Set: YY/MM/DD, MM/DD/YY. Time Format Setup Set: 24Hours, 12Hours. Time Zone Setup Time Zone setting of DVR.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Format HDD Overwrite Enable/Disable Overwrite, Values: On/Off. If Overwrite is enabled, the period can be set as 6, 12, 24, 36, 48, 72 hours and 7, 15, 30, 60 days. Pack Time Set the required packing time frame to allow the system to pack each saving file under continue recording mode. Pack time setting: 5 min, 10min, 15min, 20min, 30min, and 60min.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual GUI Display GUI display mode can be VIDEO or VGA. Video Switching Time Set the switching time when switching channels in video mode. Values: 1-99 seconds. (0 sec is Off) VGA Switching Time Set the switching time when switching channels in VGA mode. Values: 1-99 seconds. (0 sec is Off) Switching Sequence Set the switching sequence of channels. 8CH DVR Video Margin Set the display margins of the screen.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 8.8.5 User Manual User Password 8CH DVR 8.8.6 Password Setup Enable/Disable password checking. Values: On/Off (Default) Administrator account/password can not be blank. And at least 4 characters for the password. Administrator account/password Administrator account allows user to access all of functions. User account/password Access rights can be assigned by setting. Remote ID setup Can adjust remote control ID to control multiple DVR.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 8.8.7 8.8.8 User Manual Language Values: Traditional Chinese and English. Auto rebooting after change. Function Tip Show function tips below the menu items. Value: On/Off (Default). Audio Setting Audio Volume Set the volume of audio In/Out. Values: 1-10. (Default: 5) System Maintenance Auto maintenance: Set time for auto rebooting. Value: On/Off.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual F/W update Please plug the USB memory stick into the USB port on the DVR rear panel after download the new firmware to the USB memory stick. Note: the firmware only can be upgraded by using the USB port. Please don’t operate the system, remove the USB memory stick or remove the power while it is in upgrade progressing in order to prevent any serious system error. The system will automatic reboot after upgrade.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 8. Cell Phone Monitoring Operation JAVA Script surveillance: 1. The mobile Phone must support JAVA Script 2. To download the JAVA software: open Internet Browser on the mobile phone, and enter the IP address of the DVR and add /viewer.jar at the end. Example: http://xx.xxx.xxx/viewer.jar. 3. Execute the application 4. Click on “Add” on the drop down menu to add an IP address. 5.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 7. Click on “Connect” to connect to the DVR. 8. Connecting 9. Connected Menu Capture Channel[1~4/8] 10. If fail to connect, please repeat steps 7 to 9.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Before the installation, please check the ”Allow Non-market application” or “unknown source” checkbox in your mobile phone< PIC 1~2>.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 1. First, please make sure the PC synchronize software had installed and activated in your Android mobile phone. And connect your android phone to PC via USB. 2. Install “Castillo player” software player to the Android phone through your synchronize software. You may see the example below in the case of HTC.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual You may copy the APK installation package to your mobile phone or memory card, and then install it through other software. 1. Copy the “Castillo player” software package to your mobile phone through USB or directly to SD memory card. 2. Download the free APK installation software from Market, for example APKinstallerc or AppInstaller, here we use AppInstaller for example.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual card. 3. After the installation, you may find the “Castillo Player” in your program list, click it to run the program.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Press the “Setup” button to setup the connection setting . Enter your individual configuration. 4. After setting complete, enter a name you prefer then click the “Add to my favorite” checkbox to save the setting.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Press “Connect” button, it’ll connect to the DVR according to your setup, and you may see the DVR picture after the connection established. 5. Operate instruction below: Connect/Disconnect Channel Set up Display screen PTZ Zoom/aperture/focal Snap shot PTZ direction control Full screen iPhone software install/setup procedure 1.
8 Channel H.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 2. Run the “Castillo Player” after installation. Press “setup” button to setup the connection setting. Enter your individual configuration then press “back” button to go back to the main screen. 3. Press “Play” button, then you may see the DVR live view picture after the connection established .
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 4.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Symbian Software install/setup procedure 1. Copy the Symbian player to your mobile phone or memory card; you may see the example below in the case of NOKIA.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 2. Connect the mobile phone to PC via USB, copy the live view software to the memory card of your mobile phone .
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 3. Before the installation, please make sure you had canceled the “Only Signed Application”, also cancel the “Connection credentials check” . 4. Enter the folder which you’d saved the live view software “fuho_20110221.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual double click to install, follow the instruction to proceed .
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 5. After the installation, enter the “Installed Application” and you may see the “Castillo Player” inside .
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 6. Click and run the Castillo Player program . 7. Press the “Setup” button to setup the connection setting. After setting complete, click the “Add to my favorite” button to save the setting. Press “Connect” button, it’ll connect to the DVR according to your setup .
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 8.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Windows Mobile Software install/setup procedure 1. Please install “Microsoft ActiveSync” into the PC before installing CAB software. 2. Execute the Microsoft ActiveSync program in your PC first, and connect the Windows Mobile SmartPhone to PC via USB, then it’ll synchronize the SmartPhone and PC. 3. In ActiveSync program, Click “Browse” button to open the mobile device folder . 4. Copy the .
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 5. Please disconnect the SmartPhone from your PC, and begin the installation below: 6. Execute the Castillo Player CAB install package from the File browser, you may find it in your mobile device folder . 7. Double click and it’ll begin the installation, follow the instruction for setting up. After the installation, you may find the “Castillo Player” in your program .
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 8. Run the Castillo Player program, press the “Setup” button to setup the connection setting. After setting complete, enter a name you prefer then click the “Add to my favorite” checkbox to save the setting. Press OK and Leave to go back to the main screen .
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 9. Press “Connect” button, it’ll connect to the DVR according to your setup, and you may see the DVR picture after the connection established .
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 10.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Channel Connect/Disconnect Display screen Snapshot PTZ Direction Control control Zoom/aperture/focal distance Blackberry Software Connect Procedure 1.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Verify Authentication, website address input format as below rtsp://(website address)/ch(channel number)?user=(user ID)&pwd=(user password) e.g. rtsp://f16.cctvdvr.com.tw:554/ch2?user=2222&pwd=2222 2. Mobile Webpage: Please enter the ID & password again after you login, or you’ll get black screen of permission denied as below: 9.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Preface H264 Player software allows to playback the backup saving file from the DVR. System Requirement Operating System: Windows 2000, XP, Vista, Windows 7. Program obtainment and installation While user start to backup the file from DVR, the system will automatically copy the H264Player.exe file and recorded data to the backup device for example, an USB flash memory stick.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 Open File Click Pause Click Stop Click Play 1x Click Fast Forward Click Slow Forward Click Capture the image (snap shot) Click to the host computer Volume Control Drag Rewind Click Step Forward Click Mark start time Click Mark end time Click Backup Click Right click the mouse to open the Pop-up Menu pop-up menu including Setting, Language, About H264Player, Exit 10.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Preface The Web Application Manager allows the user to remotely monitoring, playback, and backup through the DVR. System Requirement Operating System: Windows 2000, XP, Vista, Windows 7 Web Browser: Internet Explorer Add-on Installation Please use the IE browser to login the IP address of DVR setting.
8 Channel H.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual (1) Select Date Event Search (2)Click or (3)Click Playback Click on pop up file list Fast Forward Click “Fast Forward” (Speed: 2X, Rewind Click “ Rewind” (Speed: 1/2, 1/ 4X, 1/ 8X, 1/ 16X) Step Forward Click “Previous”or “Step” Snapshot Click Mark start time Click Mark end time Click Backup Click 8X, 16X) to capture.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 Please refer “Camera Setup” for more information Record Please refer “Record Setup” for more information.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 Please refer “Alarm Setup” for more information. MotionDetection Please refer “Motion Detection” for more information.
8 Channel H.
8 Channel H.
8 Channel H.
8 Channel H.
8 Channel H.
8 Channel H.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 11. Appendix This appendix will show you how to do the basic operation step-by-step on search, playback, backup, network setup, email setup, and DDNS setup. 12.1 How to search and playback the footage step-by-step. Step 1. Press the SEARCH button There are two ways to enter the search menu. Option 1: If you are using the front panel or remote control, please press the “Play” button to enter the search menu.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Step 2. Select the date & time to playback the footage. Once you enter the search menu, you can have 3 optional selections to playback the footage as the picture below. 1. Date and Time Search 1.1 Select the channel and type of event that you wish to playback. 1.2 Enter the date & time that you wish to search. 1.3 Click PLAY button to playback. 2. Calendar Search 2.1 Select the specified date from the calendar selection, 2.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Note: No data: NO color; data of alarm trigger: Red color; normal record data: Green color st Each hour is divided into 2 time frames, 1 and 2 nd half of the hour, 00min:00sec to 30min:00sec and 30min:00sec to 60min:00sec respectively. Select the first half of the time frame of the date, the playback will start from 00 mins: 00 sec. Select the second half of hour frame under the date, the playback will start from 30mins:00sec.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Step 3. Channel Selection. Check on the channels you wish to playback, and then click PLAY. 12.2 How to backup the footage step-by-step. Step 1. Click the BACKUP button There are two ways to enter the BACKUP menu. Option 1: Click the right button of the mouse to open the quick menu bar, and press the “BACKUP” option to enter the search menu.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Step 2. Specify the desired channels, type, start date and time, and end date and time, then press SEARCH. Step 3. Select channels to backup. 3.1 Double click the event to preview the footage before backup. 3.2 Select the events you wish to backup by marking on “BAK” check box. 3.4 Click the backup button to storage device page.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Step 4. Choose the storage device. 4.1 Plug in the USB flash memory stick into the USB port of DVR. 4.2 Once the DVR detects the USB flash memory stick, it will show the data size and free space on the screen. 4.3 If there is lack of free space, you may try to format the USB flash memory stick first by clicking on FORMAT USB DISK 4.4 Once everything is ready, click on BACKUP to proceed. Step 5. Start Backup the file.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 12.3 How to setup the Network step by step. Decide your network environment In Network setting, you can choose the connection type from Static, DHCP, or PPPoE (which allow you to dial up by ADSL modem or 3G dongle). Below is an explanation of how you can configure your DVR to fit your network environment. 12.3.1 Static: Each network device has its own IP address.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Reference Network environment for Static IP situation Direct connection: DVR to PC (Home/Small office users) Multi-connection through HUB/SWITCH/Router (Small Office users) Here is an example of how to set up connection between the DVR and your PC. Step 1: Set your DVR network mode to static mode 1. Change the connection type to “STATIC” in DVR’s network setting 2.
8 Channel H.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual In the following menu, choose “Use the following IP address” to set up IP address manually 1 2 3 1) Enter the IP address for your PC. Be sure not to set up a duplicated IP address with any other network devices. 2) Enter Subnet mask address. This address should correspond to the Netmask address of your DVR. 3) Enter Default gateway address. This address should correspond to the Gateway address of your DVR.
8 Channel H.
8 Channel H.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual In the following menu, choose “Use the following IP address” to set up IP address manually 1 2 3 1) Enter the IP address for your PC. Be sure not to set up a duplicated IP address with any other network devices. 2) Enter Subnet mask address. This address should correspond to the Netmask address of your DVR. 3) Enter Default gateway address. This address should correspond to the Gateway address of your DVR.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 12.3.2 DHCP: DHCP (Dynamic Host Configuration Protocol) automatically assigns a valid IP address to a network device on the Internet. Allocating a fixed IP address for each device will result in idle IP addresses when the devices are not in operation. Therefore, DHCP can make more efficient use of the IP addresses. To use this feature, you have to have a PC or router to be set as DHCP server to provide the service.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual Step 2: Set your DVR network mode to DHCP mode 1 ○ 1. Change the connection type to “DHCP” in DVR’s network setting 2. If the router is correctly set, the DVR should be able to get the IP address from the router automatically.
8 Channel H.
8 Channel H.
8 Channel H.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual In the following menu, choose “Obtain an IP address automatically” If the router/DHCP server is set correctly, you should be able to connect to DVR from your PC successfully. Note: The IP address assigned to DVR would be varied when the router restarts or after a period of time. If you want to assign a fixed IP address to the DVR, please check with your MIS staff or the manual of the router. 12.3.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual How to set up a PPPoE connection for your DVR? Step 1: In Network setting menu, set the mode to “STATIC” and click the “PPPOE” to enter the setting menu. Step 2: In PPPoE/3G setting menu, set the mode to “PPPoE” and choose “ON” to enable it. Note: for account and password information, please check with your internet service provider.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 12.3.4 How to set up a 3G connection for your DVR? (Note: for supported USB 3G dongle, please check with the manufacturer for latest information). Step 1: In Network setting menu, set the mode to “STATIC” and click the “PPPOE” to enter the setting menu. Step 2: In PPPoE/3G setting menu, set the mode to “3G” and choose “ON” to enable it. Note: for dial up information, please check with your telecom company for details.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 12.4 Email Setup In DVR, you can set up an email reminder for situations like motion, alarm, etc. In the following section, we will illustrate how to set it up by using Gmail. Step 1: In Network setting menu, click on “E-MAIL SETUP” and enter the following menu Step 2: Enable the email function by choosing “ON” in E-mail Tab Step 3: ○1 SSL: (Secure Sockets Layer) this is used to secure the internet transmission.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 12.5 DDNS Setup DDNS: (Dynamic DNS). It is a service to provide the updating in real time of Internet Domain Name System (DNS) name servers to keep up to date the active DNS configuration of their configured hostnames, addresses and other information. In DVR, you can apply a DDNS service for a dynamic IP address. This will help you to use a fixed site address (such as name.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 Below we will explain how to apply a DDNS service through Dyndns 1. Go to http://www.dyndns.com 2.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 3.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 4. Select your wanted Hostname for your DVR Input your wanted hostname for your DVR here. Note: If you are using firewall or router to connect DVR, please set the DDNS setting in FW/router, then use port forwarding in order to connect DVR correctly. 5. When finished, press “Continue” to proceed.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 6. If you have never applied Dyndns service before, please create a new account first. 7. When finished, press “create account” to proceed.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 8. System will send you an email for confirmation. User Manual Please go to your email box and see if you have received it. There will be a link for you to confirm the application. 9. Go to your DVR to set the DDNS setting. (I use IE for demonstration but in the DVR OSD, you can find the same setting there). 1) Enable your DDNS service.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 12.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 13. User Manual HDD Support List Suggest to install the Hard Driver listed below to make sure the compatibility. Brand SEAGATE HITACHI Model Number Capacity ST3250310CS 250G ST3320410SV 320G ST3500418AS 500G ST3500312CS 500G ST3750528AS 750G ST31000424CS 1T ST3100528AS 1T ST31500541AS 1.5T ST31500341AS 1.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 14. USB Flash Memory Stick Support List The following recommended flash drives have passed all testing procedures and are safe to a: backup, b: Playback by PC, and c: update firmware.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual 15. Operation System For Mobile Phone Application Mobile Phone Software O/S Version Android 2.1、2.2、2.3 CastilloPlayer(Android_1.5~2.1).apk CastilloPlayer(Android_2.2~2.3).apk iPhone 3.x、4.x Castillo player WinMobile 6.5.x CastilloPlayer_5.0.3.CAB Symbian S60 v3 above CastilloPlayer_5.1.713.sisx BlackBerry Support RTSP None Protocol 16.
