200Mbps Powerline Ethernet Adapter RPLC-200 User Manual
00Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Contents Package Contents ...................................................................................................3 Chapter 1 Introduction to Hardware.........................................................................4 1.1 Expanding your Network with RPLC-200 .......................................................4 1.2 Key Features......................................................................................
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Package Contents The following items should be found in your package: 2x Rosewill RPLC-200 200Mbps Powerline Fast Ethernet Adapter 2x RJ45 Ethernet Cable 1x Quick Installation Guide 1x Resource CD for RPLC-200, including: Rosewill Powerline Utility Quick Installation Guide User Guide Note: Make sure that the package contains the above items.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Chapter 1 Introduction to Hardware Thank you for purchasing Rosewill‟s RPLC-200 Homeplug AV compliant Powerline Adapter. The RPLC-200 adapter can transmit data up to 200mbps via household‟s power outlet. RPLC-200 can help you to establish a high-speed network that supports video, voice and data without wiring and drilling.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual RPLC-200 supports 4-level type QoS and 8-level VLAN priority fields which automatically improves the streaming quality Green Feature for Power saving mode RPLC-200 will detect signals when there is no signal transmit, it will automatically enters Power Saving mode which saves near 80% of the energy consumption. 1.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual 1.4 System Requirement If need to use Powerline Utility: Operating system: Windows 98SE, 2000, ME, XP 32/64 bit and Vista 32/64bit, otherwise, no OS require CPU: Intel Pentium III or better, clock rate faster than 2.0GHz recommended RAM: At least 128MB Screen resolution: Any resolution Free disk space: At least 20MB Network interface: At least one Fast Ethernet (100 Mbps) network card, and a Ethernet Cord . 1.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual 1.5.1 LED LED Color Behavior Description Green On System runs normally. Green Blink System is resetting. System is in the process of password synchronization. - Off The PLC adapter is powered off. Green On Ethernet connection has established. Blink Data is being transmitted. - Off No Ethernet connection. Green On The PLC adapter has connected to the powerline network.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual using Cat 5E cable or above) to this port, and the other end to the router or modem. Then plug into the electrical outlet. Connecting to PC / Smart TV / NB / Blu-ray Player / Media Player / IP Phone: Insert One end of the RJ45 Cable (Recommend using Cat 5E cable or above) to this port, and the other end to the other devices. Then plug into the electrical outlet.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual 2.1 Utility Installation Please follow the steps below to install the utility. 1. Please insert the utility CD into the computer‟s CD-ROM drive. Select the Utility Installation from the Wizard Page. 2. The window for installing the utility software will display. Click Next to continue.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual 3. Select I Agree, and then Next to continue. 4. You can choose your own destination folder to install or click Browse… to select the installation folder, and then click Next to continue..
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual 5. You can choose your own destination folder to install or click Browse… to select the installation folder, and then click Next to continue. 2.2 Utility Introduction Click the desktop icon below to enter the configuration page. 2.2.1 Main Tab The Main screen provides a list of all powerline devices logically connected to the computer when the utility is running.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual The lower panel displays all the HomePlugAV remote devices, which are discovered in the current logical network. The total number of remote devices connected in the same network is displayed above the remote device panel. Network type (Public or Private) depends on the network status of the local device. Autoscan shows whether the autoscan function is on.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Click the device name to select the device in the lower panel. Click Enter Password. A dialog box appears, showing the device name and password. 錯誤! 找不到參照來源。 Click OK to verify the password. The password field accepts the device password in any case formats, with or without dash. A confirmation box appears if the password is entered correctly.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Note: The device must be in the powerline (plugged in), so that you can confirm the password and add the device to the network. If the device is not located, a warning message appears. Scan This button is used to perform an immediate search for HomePlugAV devices connected to the powerline network. By default, the utility automatically scans every a few seconds and updates the displayed information. 2.2.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual All HomePlugAV devices are loaded using a default logical network (network name), which is normally “HomePlugAV”. In the Privacy screen, you can modify a private network by changing the network names and the passwords of the devices. You can always reset to the HomePlugAV network (Public) by entering “HomePlugAV” as the network name or by clicking on the Use Default button.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual the main panel. If these devices whose passwords have been entered for the same logical network, a dialog box appears, indicating the success of this operation. For the devices whose passwords are not entered, this operation will fail and it will report a failure message. 2.2.3 Diagnostics Tab The Diagnostics screen shows the system information and history of all remote devices appeared over a period of time.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual The Lower panel displays the history of all remote devices appeared on the computer over a certain period of time. All the devices and the parameters of the devices on the powerline network are listed. Devices that are active on the current logical network show a transfer rate in the rate column. Devices on other networks, or devices that no longer exist are shown with a “?” in the rate column.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual message if the user wants to delete a device whose password has been entered. 2.2.4 About Tab The About screen shows the software version and provides a html link to a website, such as http://www.qua.qualcomm.com. Clicking the web address, you can visit the web site.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual 3.1 Using the Security Pushbutton Scenario: Devices A and B with different NMK (Network Membership Key used to authenticate/access) values are connected to the same powerline. Users want to use them to form a logical network. Forming a HomePlug AV logical network Please follow below steps to form a logical network using the Security button: 1. Press the Security button on Device A for less than 3 seconds. 2.
0Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual 1. Connect Device A to the network card of a PC. 2. Open the Utility. The Main tab page displays information about Device A after connection succeeds. Search for Local device on your computer 3. Click the Privacy tab page. Enter a name in the Private Network Name field. Setting the network name for your PLC 4. Click Set Local Device Only. When the following page is displayed, the setting succeeds.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Chapter 4 Joining a Network This chapter describes how to add a device to an existing HomePlug AV logical network (AVLN) using the Security/Reset pushbutton and using the Utility. Operation progress and outcome can be monitored by observing the behavior of the power LED. 4.1 Using the Security Pushbutton Scenario: Devices A and B are located in network N.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual 4.2 Using the Utility Scenario: Devices A and B are located in Network N. Device C (the joiner) that is located in another network attempts to join Network N. See Do as follows to add Device C to Network N using the Utility: 1. Connect Device C to the network card of a PC. 2. Open the Utility. The Main tab page displays information about Device C after connection succeeds. 3. Click the Privacy tab page.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Appendix A: Improving the Transmission Quality It is important to use the PLC product complying with the following "correct rules", because it can significantly improve the transmission capacity of the network. PLC device is recommended to plug the device directly into a wall socket, not to power stripe.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Appendix B: Specifications Spec Chipset Atheros AR7420 Standards Compliant with IEEE 1901 Compatible with HomePlug AV standard Co-existence with HomePlug 1.0 Nodes IEEE802.3, IEEE802.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Utility software OS support: Microsoft Windows 2000/XP/Vista/7 Dimensions 2.72 x 2.28 x 1.22 in (69 x 58 x 31 mm) (1 Powerline adapter) Weight 0.18 lbs.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Appendix C: Acronyms and Abbreviations AVLN AV In-home Logical Network, the AVLAN is the set of STAs that possess the same network membership key. Every AVLN is managed by a single CCo.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Appendix D: RPLC-200 QoS Support RPLC-200 allows for 4 levels of Channel Access Priority (CAP (0 – 3)). The 8 levels of VLAN Ethernet tags must be mapped to the 4 levels of CAP priority, where CAP 3 is the highest priority and CAP 0 is the lowest. CAP 3 priority might be used for voice and network management frames, and CAP 2 is used for streaming video and music while CAP 1 and CAP 0 are used for data.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual Thank you for purchasing a quality Rosewill Product. Please register your product at: www.rosewill.com for complete warranty information and future support for your product. Rosewill Customer Service Hotline: 1-800-575-9885 Rosewill Customer Service Support: techsupport@rosewill.
200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of Rosewill Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Rosewill Inc.
