Wireless N Adapter RNX-N250PC Quick Installation Guide
Wireless N Adapter RNX-N250PC Quick Installation Guide Chapter 1 Product Overview Thank you for choosing Rosewill’s 802.11n Wireless PIC adapter – 1.2 Overview of the Product RNX-N250PC. This chapter is to introduce you more about this Wireless PCI Adapter connects you with IEEE802.11n (Draft 2.0) networks at Adapter. transfer rate up to an incredible 300Mbps! By using the reflection signal, 802.11n technology increases the range and reduces “dead spots” in the 1.
Wireless N Adapter RNX-N250PC 1.3 Quick Installation Guide Product Features Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards Provides 32-bit PCI interface 2.2 Provides 300Mbps upload and download rate Supports 20MHz/40MHz frequency width Supports 64/128-bit WEP, WPA, WPA2 encryption methods Supports WMM for smooth transmit of multimedia files Supports Windows 2000, XP 32/64, Vista 32/64, Win 7 32/64, Linux Kernel 2.6.
Wireless N Adapter RNX-N250PC 1.4 Quick Installation Guide Product Specification Standard RF Output Power(Typical) Driver Support IEEE 802.11n Draft 2.0 and IEEE802.11g/b 802.11b: up to 17 ± 1 dBm Windows® 2000, XP 32/64, Vista 32/64, Win7 32/64, Linux 802.11g: up to 15 ± 1 dBm 2.6.1 802.11n: up to 16 ± 1 dBm Frequency Band Interface Security 2.400GHz ~ 2.484GHz PCI interface 2.2 64/128-bit WEP (Hex & ASCII), WPA(TKIP with IEEE 802.1x), WPA2(AES with IEEE 802.
Wireless N Adapter RNX-N250PC 1.6 Quick Installation Guide PCI Adapter LED Status The status LED indicators of the PCI Adapter are described in the following. Figure 1-1 Wireless PCI Card LED Lnk/Act ON (Green): Indicates a valid connection.
Wireless N Adapter RNX-N250PC Quick Installation Guide Chapter 2 Security Check List before Installation Wireless Networks are very convenient, however, since it uses radio waves to send information. It can be vulnerable from those who intended to do harm. So we recommend you take additional steps to secure your wireless network. Change the default wireless network name or SSID on your wireless router Change the default password on your wireless router Enable encryption.
Wireless N Adapter RNX-N250PC Quick Installation Guide Chapter 3 Installation Guide 3.1 Hardware Installation To install the adapter, follow these steps listed below: 4. Reconnect your PC’s power and turn on your desktop PC. 1. Turn off your desktop PC and disconnect the power. 2. Remove your PC case and locate an available PCI slot on the Note: Select Cancel when “Found New Hardware” window appears. motherboard. Remove the metal slot cover on the back of the PC.
Wireless N Adapter RNX-N250PC 3.2 Quick Installation Guide Software Installation Note: The following driver installation guide uses Windows® XP as the 2. Insert the CD-Rom that came with this product to your CD-Rom drive. The presumed operation system. The procedures and screens in Windows® menu window pops up automatically as Figure 3-3. Please click the 2000 and Vista are familiar with Windows® XP. “Driver” button of this product.
Wireless N Adapter RNX-N250PC Quick Installation Guide 3. Select if you are going to configure your wireless network with this 4. Click the “Install” button to start installing. Rosewill Utility or with Microsoft Zero Configuration tool.
Wireless N Adapter RNX-N250PC Quick Installation Guide 5. Click the “Finish” button to complete installation. Figure 3-6 6. You may be prompt to restart your computer for the driver to take effect.
Wireless N Adapter RNX-N250PC Quick Installation Guide Chapter 4 Connection Guide This chapter will help you understand the management interface of the device and how to manage the device. 4.1 Configures a Basic Network Connection 4.1.1 Selecting configuration tool Figure 4-1 4.2 Connecting with Microsoft Zero Configuration Windows XP includes a wireless configuration utility named 1.
Wireless N Adapter RNX-N250PC Quick Installation Guide 2. The tool shows the available wireless networks. Select your network SSID to connect with like Figure 4-3. Figure 4-4 4. If your wireless Network does not contains encryption, select the intended access point and click "Connect". Then click Figure 4-3 "Connect Anyway" like Figure 4-5. 3. If your wireless Network has encryption enable, you will be ask to enter the password like Figure 4-4.
Wireless N Adapter RNX-N250PC Quick Installation Guide Figure 4-6 Figure 4-5 6. You should see the pop-up window on your low right hand 5. Once completed, you should see like Figure 4-6 as your corner indicate the connected status. As shown in Figure 4-7. computer is now “Connected” with your wireless Network.
Wireless N Adapter RNX-N250PC Quick Installation Guide Wireless N Adapter RNX-N250PC Please register your product at: www.rosewill.com for complete warranty information and future support for your product. Support: techsupport@rosewill.
