User's Manual

1 Introduction
The WLAN AP Router is IEEE 802.11b/g WLAN AP router solution; setting SOHO and enterprise
standard for high performance, secure, manageable and reliable WLAN.
This document describes the steps required for the initial IP address assignment and other WLAN
router configuration. The description includes the implementation of the above steps.
1.1 Package contents
The package of the WLAN AP Router includes the following items,
9 The WLAN AP Router
9 The power adapter
9 The Documentation CD
9 2dbi antenna
1.2 Product Specifications
Product Name WLAN AP Router
Standard 802.11b/g(Wireless), 802.3(10BaseT), 802.3u(100BaseT)
Data Transfer Rate 54Mbps(Wireless), 100Mbps(Ethernet)
Modulation Method CCK(802.11b), OFDM(802.11g)
Frequency Band 2.4GHz - 2.483GJz ISM Band, DSSS
RF Output Power CCK< 14dBm (Typical)±1, OFDM< 12dBm (Typical)±1
Receiver Sensitivity 802.11b -80 dBm@10%, 802.llg -68 dBm@8%
Operation Range 30 to 280 meters (dependent on surroundings)
Antenna External Antenna
LED Power, Active (WLAN), Act/Link (Ethernet)
Security
64 bit/ 128 bit WEP, WPA, WPA2, port filtering, IP filtering,
MAC filtering, port forwarding and DMZ hosting
LAN interface
One 10/100BaseT with RJ45 connector (WAN)
Four 10/100BaseT with RJ45 connectors (LAN)
Power Consumption 12 V, 1A AC Power Adapter
Operating Temperature 0 ~ 50°C ambient temperature
Storage Temperature -20 ~ 70°C ambient temperature
Humidity 5 to 90 % maximum (non-condensing)
Dimension 160 x 120 x 30 mm
- 8 -