User's Manual

Reset Click the Reset button to abort change and recover the previous
configuration setting.
Current Access Control
List
It shows the registered clients that are allowed to link to this WLAN
AP Router.
Delete Selected Click to delete the selected clients that will be access right removed
from this WLAN AP Router.
Delete All
Click to delete all the registered clients from the access allowed list.
Reset Click the Reset button to abort change and recover the previous
configuration setting.
3.3.8 WDS Settings
Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet does. To do this,
you must set these APs in the same channel and set MAC address of other AP that you want to communicate with in the
table and then enable the WDS.
Screen snapshot - WDS Setup
- 28 -