User`s manual

Dual Band Wireless PCI-E Adapter - RNWD-N9003PCE- User’s Manual
-47-
2) To change the WEB management port number: Log in to the Router, click
the “Security” menu on the left of your browser, and click "Remote
Management" submenu. On the "Remote Management" page, type a
port number except 80, such as 88, into the "Web Management Port"
field. Click Save and reboot the Router.
Figure A-8 Remote Management

Note:
If the above configuration takes effect, configure to the Router by typing
192.168.1.1:88 (the Router’s LAN IP address: Web Management Port) in the
address field of the Web browser.
3) Log in to the Router, click the “Forwarding” menu on the left of your
browser, and click the "Virtual Servers" submenu. On the "Virtual
Servers" page, click Add New…, then on the “Add or Modify a Virtual
Server” page, enter “80” into the blank next to the “Service Port”, and
your IP address next to the “IP Address”, assuming 192.168.1.188 for an
example, remember to Enable and Save.