User`s manual

Dual Band Wireless PCI-E Adapter - RNWD-N9003PCE- User’s Manual
-43-
Figure A-2 PPPoE Connection Mode

Note:
a) Sometimes the connection cannot be disconnected although you
specify a time to Max Idle Time, since some applications is visiting
the Internet continually in the background.
b) If you are a Cable user, please configure the Router following the
above steps.
2. How do I configure the Router to access the Internet by Ethernet users?
1) Log in to the Router, click the “Network” menu on the left of your browser,
and click "WAN" submenu. On the WAN page, select “Dynamic IP” for
"WAN Connection Type", finish by clicking Save.
2) Some ISPs require that you register the MAC Address of your adapter,
which is connected to your cable/DSL Modem during installation. If your
ISP requires MAC register, log in to the Router and click the "Network"
menu link on the left of your browser, and then click "MAC Clone"
submenu link. On the "MAC Clone" page, if your PC’s MAC address is
proper MAC address, click the Clone MAC Address button and your
PC’s MAC address will fill in the "WAN MAC Address" field. Or else, type
the MAC Address into the "WAN MAC Address" field. The format for the