User`s manual

Dual Band Wireless PCI-E Adapter - RNWD-N9003PCE- User’s Manual
-40-
can see XFigure 0-7. Select Enter the new device’s PIN and enter
the PIN value of the adapter shown in Figure 0-7, click Connect.
Figure 0-7
3. When Figure 0-5 appears, the WPS configuration is complete.
4.2.2 Enter the PIN from your AP device
1. Open the WPS Utility and you will see Figure 0-3 . Click Next to continue.
Then Figure 0-8 will appear. Select the third option and enter the PIN value
which is labeled on the bottom of the Router. Click Next.
Figure 0-8
2. When Figure 0-5 appears, the WPS configuration is complete.