User`s manual

Dual Band Wireless PCI-E Adapter - RNWD-N9003PCE- User’s Manual
-23-

Note:
Select different
Security Options
, the configurations are different; you can select the
appropriate security option and configure the exact key as your need.
3. Edit the Advanced tab
This screen below allows you to make advanced configuration for the profile.
Figure 0-6
 Power Save Mode - Please select the power save mode in the drop-down
list.
• Maximum - Selects maximum mode to let the access point buffer
incoming messages for the Adapter. The Adapter will detect the access
point if any messages are waiting periodically.
• Normal - Normal mode uses maximum when retrieving a large number
of packets, then switches back to power save mode after retrieving the
packets.
• Off - Turns power saving off, thus powering up the Wireless PCI-E
Adapter continuously for a short message response time.
 Network Type: There are basically two modes of networking:
• Infrastructure - All wireless clients will connect to an access point or