User's Manual

Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt"""""""""""""""""/"RNWD-N9003PCE/"""""""""""""""""""""""""""""""""Wugt‚u"Ocpwcn"
MAC Address is XX-XX-XX-XX-XX-XX. Then click the Ucxg button. It will
take effect after rebooting.
Figure A-3 MAC Clone
50" K"ycpv"vq"wug"PgvOggvkpi."yjcv"fq"K "pggf"vq"fqA"
1) If you start NetMeeting as a sponsor, you don’t need to do anything with
the Router.
2) If you start as a response, you need to configure Virtual Server or DMZ
Host and make sure the H323 ALG is enabled.
3) How to configure Virtual Server: Log in to the Router, click the
“Hqtyctfkpi” menu on the left of your browser, and click "Xktvwcn"
Ugtxgtu" submenu. On the "Xktvwcn"Ugtxgtu" page, click Cff"Pgy”.
Then on the “Cff"qt"Oqfkh{"c"Xktvwcn"Ugtxgt"Gpvt{” page, enter “1720”
for the “Service Port” blank, and your IP address for the “IP Address”
blank, taking 192.168.1.169 for an example, remember to Gpcdng and
Ucxg.
-42-