User's Manual

Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt"""""""""""""""""/"RNWD-N9003PCE/"""""""""""""""""""""""""""""""""Wugt‚u"Ocpwcn"
Crrgpfkz"C<"HCS"
30" Jqy"fq"K"eqphkiwtg"vjg"Tqwvgt"vq"ceeguu"vjg"Kpvgtpgv"d{"CFUN"wugtuA"
1) First, configure the ADSL Modem configured in RFC1483 bridge model.
2) Connect the Ethernet cable from your ADSL Modem to the WAN port on
the Router. The telephone cord plugs into the Line port of the ADSL
Modem.
3) Log in to the Router, click the “Pgvyqtm” menu on the left of your browser,
and click "YCP" submenu. On the YCP page, select “PPPoE” for WAN
Connection Type. Type user name in the “User Name” field and
password in the “Password” field, finish by clicking Eqppgev.
Figure A-1 PPPoE Connection Type
4) If your ADSL lease is in “pay-according-time” mode, select “Connect on
Demand” or “Connect Manually” for Internet connection mode. Type an
appropriate number for “Max Idle Time” to avoid wasting paid time.
Otherwise, you can select “Auto-connecting” for Internet connection
mode.
-40-