User's Manual
Table Of Contents
- 封面
- N900PCE_User Guide.pdf
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Installation Guide
- Chapter 3 Configuration Guide
- Chapter 4 WPS Configuration
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt"""""""""""""""""/"RNWD-N9003PCE/"""""""""""""""""""""""""""""""""Wugt‚u"Ocpwcn"
505"Hqt"Ykpfqyu"9"
Wireless N Client Utility is not available for Windows Vista. So after the Adapter's
driver has been installed, we have to use Windows WLAN Autoconfig to establish
a connection. Please follow the steps below.
1. Click the icon at the bottom of your screen in your system tray and then
you will see the available wireless network list. Select the SSID of your
Access Point and click Eqppgev.
"
Figure 0-18
2. If your wireless network is secured, you will be required to enter the security
key as shown in Figure 0-19. Enter the password in the Ugewtkv{"
Mg{"field,
take 3456789:;2 for example. And then click QM.
-33-