User's Manual

Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt"""""""""""""""""/"RNWD-N9003PCE/"""""""""""""""""""""""""""""""""Wugt‚u"Ocpwcn"
5030408"Uecp"Cxckncdng"Pgvyqtmu"
1. Click Uecp on the Profile Management screen (shown in Figure 0-2X), the
Available Infrastructure and Ad Hoc Networks window will appear below.
2. Click Tghtguj to refresh the list at any time.
3. Highlight a network name and click Cevkxcvg to connect to an available
network. If no configuration profile exists for that network, the Profile
Management window will open the Igpgtcn tab screen. Fill in the Profile
name and click QM to create the configuration profile for that network.
Figure 0-10
5030409"Cwvq"Rtqhkng"Ugngevkqp"Ocpcigogpv"
The auto selection feature allows the adapter to automatically select a profile
from the list of profiles and use it to connect to the network. To add a new profile
into the Auto Selected Profiles list, please follow these steps.
1. On the Profile Management screen (shown in Figure 0-2X), click Qtfgt"
Rtqhkngu”.
2. The Auto Profiles Selection management window will appear (shown in
Figure 0-11) with a list of all created profiles in the Available Profiles.
-27-