User's Manual

Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt"""""""""""""""""/"RNWD-N9003PCE/"""""""""""""""""""""""""""""""""Wugt‚u"Ocpwcn"
Figure 0-6
 Rqygt"Ucxg"Oqfg"/"Please select the power save mode in the drop-down
list."
 Oczkowo / Selects maximum mode to let the access point buffer
incoming messages for the Adapter. The Adapter will detect the access
point if any messages are waiting periodically.
 Pqtocn"/ Normal mode uses maximum when retrieving a large number
of packets, then switches back to power save mode after retrieving the
packets.
 Qhh" / Turns power saving off, thus powering up the Wireless PCI-E
Adapter continuously for a short message response time.
 Pgvyqtm"V{rg< There are basically two modes of networking:
 Kphtcuvtwevwtg / All wireless clients will connect to an access point or
wireless Router.
 Cf/Jqe / Directly connecting to another computer, for peer-to-peer
communication, using wireless network adapters on each computer,
such as two or more N900PCE wireless adapters.
"
-23-