User's Manual
Table Of Contents
- 封面
- N900PCE_User Guide.pdf
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Installation Guide
- Chapter 3 Configuration Guide
- Chapter 4 WPS Configuration
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt"""""""""""""""""/"RNWD-N9003PCE/"""""""""""""""""""""""""""""""""Wugt‚u"Ocpwcn"
5030403"Cff"qt"Oqfkh{"c"Eqphkiwtcvkqp"Rtqhkng"
To add a new configuration profile, click Pgy on the Profile Management tab. To
modify a configuration profile, select the configuration profile from the Profile list
and click Oqfkh{. Then you will see the Management dialog box (shown in Figure
0-3).
30" Gfkv"vjg"Igpgtcn"vcd"
Rtqhkng" Pcog" / Please enter the Profile name which identifies the
configuration profile. This name must be unique. Note that the profile names
are not case-sensitive.
Enkgpv"Pcog"/ Please enter a name which identifies the client machine.
Pgvyqtm"Pcogu"*UUKFu+"/ Please enter the IEEE 802.11 wireless network
name. This field has a maximum limit of 32 characters.
Figure 0-3
40" Gfkv"vjg"Ugewtkv{"vcd"
Select the Security tab in the screen above, and then you can edit the fields to
configure the profile. To define the security mode, select the radio button of the
desired security mode as follows.
-20-