RNWD‐N9003PCE Dual Band Wireless PCIE Adapter User Manual
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Eqpvgpvu" Rcemcig"Eqpvgpvu000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000004 Ejcrvgt"3"Kpvtqfwevkqp 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000005 303"Mg{"Hgcvwtgu000000000000000000000000000000000000000000000000000000
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Rcemcig"Eqpvgpvu" The following items should be found in your package: 1x Rosewill RNWD-N9003PCE (P;22REG) Dual-Band Wireless PCI-E Adapter Quick Installation Guide 1x Resource CD for P;22REG, including: Rosewill Wireless N Utility and Drivers Wi-Fi Protected Setup (WPS) program User Guide Other Helpful Information "Pq
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Ejcrvgt"3"Kpvtqfwevkqp" This Dual Band Wireless PCI-E adapter is designed to provide a high-speed and ultimate wireless performance for your PC. With a fast wireless connection, you can get a better Internet experience, such as downloading, gaming, video streaming and etc.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Yktgnguu/P"Urggf"wr"vq"672Odru" Both the adapter’s 2.4GHz and 5GHz bands support the maximum speed of up to 450Mbps, which generates a maximum theoretical wireless throughput bringing you a limitless wireless experience. Cfxcpegf"Ugewtkv{" WPA/WPA2 encryption standards ensure your wireless connection is safe from intruders.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Ejcrvgt"4"Kpuvcnncvkqp"Iwkfg" Please install the PCI-E adapter into your computer before installing the driver software from the Resource CD. 403"Jctfyctg"Kpuvcnncvkqp" 1. Turn off your computer and unplug the power cord from the computer. 2. Open the case and locate an available PCI-E slot. Remove the metal slot cover on the back of the PC.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" "Pqvg<" The promoted Found New Hardware Wizard screen will pop up when the adapter is installed correctly. Click Ecpegn. 404"Uqhvyctg"Kpuvcnncvkqp" 40403"Hqt"Ykpfqyu"ZR" The adapter’s Setup Wizard will guide you through the installation procedures for Windows 7, Windows Vista, and Windows XP.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-2 3. After that, you should choose a Setup type. It is recommended that you select Kpuvcnn"Enkgpv"Wvknkvkgu"cpf"Ftkxgt. Select Kpuvcnn"Ftkxgt"Qpn{ to install driver only (shown in Figure 0-3). Click Pgzv to continue. X Figure 0-3 4.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Pgzv"in the screen below (shown in Figure 0-4). Figure 0-4 5. After that, select the program folder, you should create a new folder name or select one from the Gzkuvkpi"Hqnfgtu list. It is recommended that you keep the default setting. Click Pgzv to continue the installation.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-5 6. Choose configuration tool, if you are not sure, please leave it default. Then click Pgzv to continue.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" "Pqvg<" For Windows XP, the Setup Wizard will notify you of how to proceed with the installation during these steps (shown in Figure 0-7). Our drivers have been tested thoroughly, and are X able to work with the operating system. Click Eqpvkpwg"Cp{yc{ to continue the Installation. Figure 0-7 7.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-8 40404"Hqt"Ykpfqyu"XKUVC" 1. Insert the Resource CD into your CD-ROM drive. To continue, find the CD/DVD drive where the installation CD was placed. Open P;22REG folder, and double-click Ugvwr0gzg. Then you will see Figure 0-9.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 2. Soon, Figure 0-10 will display after a moment. Click Pgzv to continue. Figure 0-10 3. Wait a while for the setup as shown in Figure 0-11.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" "Pqvg<" For Windows Vista, the Setup Wizard will notify you about the Windows Security with the installation during these steps (shown in Figure 0-12). Our drivers have been tested X thoroughly, and are able to work with the operating system. Click Kpuvcnn" vjku" ftkxgt" uqhvyctg"cp{yc{ to continue the Installation. Figure 0-12 4.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 40405"Hqt"Ykpfqyu"9" 1. Insert the Resource CD into your CD-ROM drive. To continue, find the CD/DVD drive where the installation CD was placed. Open P;22REG folder, and double-click Ugvwr0gzg. Then you will see Figure 0-14. Figure 0-14 2. Soon, Figure 0-15 will display after a moment. Click Pgzv to continue.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-15 3. Wait a while for the setup as shown in Figure 0-16.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" "Pqvg<" For Windows7, the Setup Wizard will notify you about the Windows Security with the installation during these steps (shown in Figure 0-17). Our drivers have been tested thoroughly, and are able to work with the operating system. Click Kpuvcnn" vjku" ftkxgt" uqhvyctg"cp{yc{ to continue the installation. Figure 0-17 4.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Ejcrvgt"5"Eqphkiwtcvkqp"Iwkfg" 503"Hqt"Ykpfqyu"ZR" In Windows XP, N900PCE can be configured by Wireless N Client Utility. This chapter describes how to configure your Adapter for wireless connectivity on your Wireless Local Area Network (WLAN) and use the data security encryption features.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-1 Vjg"hqnnqykpi"vcdng"fguetkdgu"vjg"kvgou"hqwpf"qp"vjg"Ewttgpv"Uvcvwu"uetggp0" Rtqhkng"Pcog"/ This shows the name of current selected configuration profile. The configuration of Profile name will be described on the Igpgtcn tab of Rtqhkng"Ocpcigogpv.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" can configure it on the Ugewtkv{ tab of Rtqhkng"Ocpcigogpv. Ugtxgt" Dcugf" Cwvjgpvkecvkqp" /" This" shows whether the server based authentication is used. Ukipcn"Uvtgpivj"/ This shows the strength of the signal. Enkem"Advanced"qp"vjg"uetggp"cdqxg.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 5030403"Cff"qt"Oqfkh{"c"Eqphkiwtcvkqp"Rtqhkng" To add a new configuration profile, click Pgy on the Profile Management tab. To modify a configuration profile, select the configuration profile from the Profile list and click Oqfkh{. Then you will see the Management dialog box (shown in Figure 0-3).
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-4 YRC1YRC4< Wi-Fi Protected Access. YRC1YRC4"Rcuurjtcug< Wi-Fi Protected Access Passphrase. :2403z< Enables 802.1x security. Rtg/Ujctgf" Mg{" *Uvcvke" YGR+< Enables the use of shared keys that are defined on both the access point and the station.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode: Figure 0-5 "Pqvg<" Select different Ugewtkv{"Qrvkqpu, the configurations are different; you can select the appropriate security option and configure the exact key as your need.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-6 Rqygt"Ucxg"Oqfg"/"Please select the power save mode in the drop-down list." Oczkowo / Selects maximum mode to let the access point buffer incoming messages for the Adapter. The Adapter will detect the access point if any messages are waiting periodically.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" "Pqvg<" 1) An Infrastructure network contains an Access Point or wireless Router. All the wireless devices or clients will connect to the wireless Router or access point. 2) An Ad-Hoc network contains only clients, such as laptops with wireless desktop adapters. All the adapters must be in Ad-Hoc mode to communicate.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-7 5030404"Tgoqxg"c"rtqhkng" 1. Go to the Profile Management tab (shown in Figure 0-2 ). X 2. Select the profile name in the Profiles List. 3. Click Tgoqxg. "Pqvg<" The profile being used can’t be removed. 5030405"Uykvej"cpqvjgt"Rtqhkng" 1. Go to the Profile Management screen (shown in Figure 0-2 ). X 2.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-8 5030407"Korqtv"c"Rtqhkng" 1. From the Profile Management screen (shown in Figure 0-2), click Korqtv”. Then the Import Profile will appear below. 2. Browse to the directory where the profile is located. 3. Highlight the profile name. 4. Click Qrgp, the imported profile will then appear in the Profiles List.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 5030408"Uecp"Cxckncdng"Pgvyqtmu" 1. Click Uecp on the Profile Management screen (shown in Figure 0-2 ), the Available Infrastructure and Ad Hoc Networks window will appear below. X 2. Click Tghtguj to refresh the list at any time. 3. Highlight a network name and click Cevkxcvg to connect to an available network.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-11 3. Highlight the profiles to add to auto profile selection, and click Cff. The profile will appear in the Auto Selected Profiles box. 4. Highlight a profile in the Auto Selected Profiles box. 5. Click Oqxg"Wr or Oqxg"Fqyp as appropriate.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 50305"Fkcipquvkeu" The Fkcipquvkeu tab of the Wireless N Client Utility provides buttons used to retrieve receiving and transmitting statistics. The Diagnostics tab does not require any configuration.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Ftkxgt"Xgtukqp"/ The version of the wireless network adapter driver. Ftkxgt"Fcvg"/ The creation date of the wireless network adapter driver. Enkgpv"Pcog"/"The name of the client computer.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" " Figure 0-14 2. This page will then display and you will see the available wireless network list. Select the SSID of your Access Point, take YCTG for example. Click Eqppgev.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 3. If the key entered is correct, you will successfully connect to the network. " Figure 0-16 4. Click Enqug to finish.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 505"Hqt"Ykpfqyu"9" Wireless N Client Utility is not available for Windows Vista. So after the Adapter's driver has been installed, we have to use Windows WLAN Autoconfig to establish a connection. Please follow the steps below. 1.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" " Figure 0-19 3. If the key entered is correct, you will successfully connect to the network as shown in Figure 0-20.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Ejcrvgt"6"YRU"Eqphkiwtcvkqp" WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network quickly. If the wireless Router supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless card and Router using either Push Button Configuration (PBC) method or PIN method.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 603"RDE"*Rwuj"Dwvvqp"Eqphkiwtcvkqp+"ogvjqf" 1. Firstly, press the WPS button directly on the front panel of the Router shown in Figure 0-2. Figure 0-2 2. Secondly, Double click the icon on the desktop to open the WPS Utility and then you can see the welcome screen shown as Figure 0-3.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-4 3. Then wait a minute until Figure 0-5 appears. Click Hkpkuj to complete the WPS configuration.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 604"RKP"ogvjqf" There are two ways to configure the WPS by RKP"ogvjqf: 1) Enter a PIN into your AP device. 2) Enter the PIN from your AP device. Following are the detailed configuration procedures of each way. 60403"Gpvgt"c"RKP"kpvq"{qwt"CR"fgxkeg" 1.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure 0-7" 3. When Figure 0-5 appears, the WPS configuration is complete. 60404"Gpvgt"vjg"RKP"htqo"{qwt"CR"fgxkeg" 1. Open the WPS Utility and you will see Figure 0-3. Click Pgzv" to continue. Then Figure 0-8will appear. Select the third option and enter the PIN value which is labeled on the bottom of the Router. Click Pgzv. Figure 0-8 2.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Crrgpfkz"C<"HCS" 30" Jqy"fq"K"eqphkiwtg"vjg"Tqwvgt"vq"ceeguu"vjg"Kpvgtpgv"d{"CFUN"wugtuA" 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router. The telephone cord plugs into the Line port of the ADSL Modem.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure A-2 PPPoE Connection Mode "Pqvg< a) Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications is visiting the Internet continually in the background. b) If you are a Cable user, please configure the Router following the above steps.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" MAC Address is XX-XX-XX-XX-XX-XX. Then click the Ucxg button. It will take effect after rebooting. Figure A-3 MAC Clone 50" K"ycpv"vq"wug"PgvOggvkpi."yjcv"fq"K"pggf"vq"fqA" 1) If you start NetMeeting as a sponsor, you don’t need to do anything with the Router.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure A-4 Figure A-5 Virtual Servers Add or Modify a Virtual server Entry "Pqvg<" Your opposite side should call your WAN IP, which is displayed on the “Status” page." 4) How to enable DMZ Host: Log in to the Router, click the “Hqtyctfkpi” menu on the left of your browser, and click "FO\" submenu.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Figure A-6 DMZ 5) How to enable H323 ALG: Log in to the Router, click the “Ugewtkv{” menu on the left of your browser, and click “Dcuke"Ugewtkv{” submenu. On the “Dcuke"Ugewtkv{” page, check the Gpcdng radio button next to J545"CNI. Remember to click the Ucxg button. Figure A-7 Basic Security 60" K"ycpv"vq"dwknf"c"YGD"Ugtxgt"qp"vjg"NCP.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 2) To change the WEB management port number: Log in to the Router, click the “Ugewtkv{” menu on the left of your browser, and click "Tgoqvg" Ocpcigogpv" submenu. On the "Tgoqvg"Ocpcigogpv" page, type a port number except 80, such as 88, into the "Web Management Port" field. Click Ucxg and reboot the Router.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" " Figure A-9 Figure A-10 Virtual Servers Add or Modify a Virtual server Entry 70" Vjg"yktgnguu"uvcvkqpu"ecppqv"eqppgev"vq"vjg"Tqwvgt0" 1) Make sure the "Gpcdng"Yktgnguu"Tqwvgt"Tcfkq" is checked. 2) Make sure that the wireless stations' SSID accord with the Router's SSID.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Crrgpfkz"D<"Eqphkiwtkpi"vjg"RE" In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if necessary. 30" Eqphkiwtg"VER1KR"eqorqpgpv" 1) On the Windows taskbar, click the Uvctv button, and then click Eqpvtqn" Rcpgn.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Hkiwtg"D/4" 5) The following VER1KR"Rtqrgtvkgu window will display and the KR"Cfftguu" tab is open on this window by default.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Hkiwtg"D/5" "Pqvg<"For Windows 98 OS or before, the PC and Router may need to be restarted." " Ugvvkpi"KR"cfftguu"ocpwcnn{" 1 Select Wug"vjg"hqnnqykpi"KR"cfftguu"radio button. And the following items available 2 If the Router's LAN IP address is 192.168.1.1, specify the KR"cfftguu as 192.168.1.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" 4 Select Wug"vjg"hqnnqykpi"FPU"ugtxgt"cfftguugu. In the Rtghgttgf FPU" Ugtxgt"field you can enter the same value as the Fghcwnv"icvgyc{"or type the local DNS server IP address. Hkiwtg"D/6 Pqy< Click QM to keep your settings.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" Crrgpfkz"E<"Urgekhkecvkqpu" Igpgtcn Interface PCI-E Interface Standards IEEE802.11a; IEEE802.11b; IEEE802.11g; IEEE802.11n; IEEE802.1x Operating System Windows XP / Windows Vista / Windows 7 Radio Data Rate 11a: 6/9/12/18/24/36/48/54Mbps 11b: 1/2/5.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" EQR[TKIJV"("VTCFGOCTMU" Specifications are subject to change without notice. is a registered trademark of Rosewill Inc. Other brands and product names are trademarks or registered trademarks of their respective holders.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn" equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device has been designed to operate with an antenna having a maximum gain of 2 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
