User manual

SATAIII PCI-E RAID Controller Card - RC-230- User’s Manual

-6-

Chapter 2 Getting Start

2.1 Hardware Layout

Note: There are six SATA ports in PCI-E SATA 6G Card. We name these ports

character A through F. Ports A to D are internal SATA ports and E & F are external

eSATA ports. By changing the jumper setting on PCI-E SATA 6G Card allows you to

select between external and internal ports to use. By default, port A, B, C and D are

working.

Jumper Settings

Description

Active Port

J1-J4

1-2 close

Enable SATA Port A

2-3 close

Enable eSATA Port E

J5-J8

1-2 close

Enable SATA Port B

2-3 close

Enable eSATA Port F

Port C and D are always active. With different jumper setting you can active port A, B,

E and F by referencing the above table.

2.2 Hardware Installation

1. Turn off the power to your computer.