User manual

SATAIII PCI-E RAID Controller Card - RC-230- User’s Manual
-18-
3. In the Topology pane, scroll to Virtual Disks (VD 0: New_VD in Figure 17),
and press Enter to select. A menu pops-up, as shown in Figure 17
Scroll to Rebuild and press Enter to configure the rebuild process.
Figure 17 Rebuild Virtual Disk
4. Scroll through the list of free disk, as shown Figure 18, and press Space to
select or unselect a replacement physical disk. Press Enter to continue.
Figure 18 Select Replacement Disk