User manual

SATAIII PCI-E RAID Controller Card - RC-230- Users Manual
-16-
Figure 14 Erase RAID Configuration Data
2.3.2.3 Rebuilding Virtual Disk
Note: The PCI-E SATA 6G Raid Card BIOS supports manual rebuilding of RAID 1
virtual disks. The rebuild process is both initiated and complete in the BIOS. The
Marvell RAID Utility (MRU), which runs in an OS environment, cannot be used to
either initiate, resume, or complete the rebuild process. Spare physical disks are not
supported.
To manually rebuild a RAID 1 virtual disk
1. When a virtual disk is degraded, the Status of a virtual disk is changed from
Functional to Degrade, as shown in Figure 15.