User manual

SATAIII PCI-E RAID Controller Card - RC-230- User’s Manual
-14-
Figure 12 Virtual Disk in Topology Pane
2.3.2 Managing Virtual Disks
This section contains the following topics:
 Viewing Properties of Virtual Disk
 Erasing RAID Configuration Data
 Rebuilding Virtual Disk
 Deleting Virtual Disk
2.3.2.1 Viewing Properties of Virtual Disk
1. To view the properties of a virtual disk, scroll to the Virtual Disk (VD 0: Default
in Figure 13) in the Topology pane. The properties of the virtual disk are
displayed in the Information pane when VD 0: Default is highlighted, as
shown in Figure 13.