POWER SUPPLY Turbo series User Manual Content • Features Descriptions.............................................. P2 • Specification............................................................ P3 • Installation................................................................ 1. Installing Power Supply....................................... 2. 20+4 pin Main Connector.................................... 3. 4+4 pin Connector............................................... 4. 6 pin PCI-Express Connector......
POWER SUPPLY Turbo series User Manual Features Descriptions • ATX V2.2 Dual 12V Rails • Extreme 135mm cooling Fan • 20+4 pin Main Connector • 4/8-pin +12v and EPS Connector • Dual PCI-Express Connectors for your SLI • Four SATA Connectors • Mirror Titanium Finish • All cables with black mesh sleeving 2 © 2004-2006 Rosewill Inc.
POWER SUPPLY Turbo series User Manual Input • AC Input Voltage : 115V/230V • AC Input Frequency : 50/60HZ • AC input Current : 8.8A (RMS) for 115VAC Input 5.7A (RMS) for 230VAC Input Output Voltage MAX.Current MAX.Watt Total Watt Regulation Noise & Ripple (mV) +3.3V +5V 30A 25A 160W ±5% 100 ±5% 100 +12V1 +12V2 17A 18A 368W 550W ±5% ±5% 120 120 -12V 0.6A 7.2W -5V 0.6A 3W ±10% 200 ±10% 200 +5VSB 2.5A 12.
POWER SUPPLY Turbo series User Manual Environment Operation Temperature Storage Temperature Operating Humidity Storage Humidity : 0°c to +40°c : 0°c to +80°c : 10% to 90% RH : 10% to 90% RH Safety standards TUV/CE/CB/FCC/UL EMI Standard Meet FCC class B and FTZ. standard. HI-POT Testing Input to ground : 15KVac/10mA 3 second Input to output : 15KVac/10mA 5 second Insulation resistance Input to ground : Min 50M ͈ Input to output : Min 50M ͈ Reliability MTBF : 100000 hours at 25°c ambient temperature.
POWER SUPPLY Turbo series User Manual Installation 1.Installing Power supply Affix the power supply to the case with screws. 2. 20+4 pin Main Connector 20pin 24pin • Detach the 4 pin connector to have a 20 pin main connector • Attach the 4 pin connector to have a 24 pin main connector • Plug the 20 pin connector onto the motherboard. • Plug the 24 pin connector onto the motherboard. NOTE : 1.Confirm 20 pin or 24 pin main connector your motherboard needs before the installation. 2.
POWER SUPPLY Turbo series User Manual 3. 4+4 pin Connector 4 pin 8 pin • Separate the 8 pin EPS +12V connector to have two 4 pin connector • Combine two 4 pin connectors to have a 8 Pin EPS +12V connector • Pick anyone 4 pin +12V connector to plug onto the motherboard • Plug the 8 pin EPS +12V connector onto the motherboard. NOTE : 1.Confirm 4 pin +12V or 8 pin EPS +12V connector your motherboard needs before the installation. 2.4 pin here CAN NOT be used for the main connector.
POWER SUPPLY Turbo series User Manual 4. 6 pin PCI-Express Connector The 6 pin PCI-Express connector for video card only. NOTE : Confirm if your video card needing the 6 pin PCI-Express connector or not before the installation. Not every video card needs it. 5. 4 pin Molex Connector The 4 pin Molex connector used for HDD, Optical Drive and other devices needing it. 6. 4 pin Floppy Connector The 4 pin Floppy connectors used for Floppy disk or Zip drives. 7.
POWER SUPPLY Turbo series User Manual 8. Before starting your system Select the proper voltage setting. ( Setting for United States is 115 Volt ) Attach the power core to the power supply Connect the power core to a power source. Confirm the power supply is on on 9 © 2004-2006 Rosewill Inc.
