LCD Monitor Series 17.0 TFT Active Matrix LCD Panel User’s Manual All Information in this manual may change from time to time without prior notice.
17.0 TFT Active Matrix LCD Panel User Manual Table of Content Table of Content .................................................................................. …1 Safety Instructions.............................................................................. …2 View of Monitor ....................................................................................... 3 Unpacking................................................................................................ 5 Warning........................
17.0 TFT Active Matrix LCD Panel User Manual Safety Instructions 1. Please read these safety instructions carefully. 2. Please keep this User‘s Manual for later reference. 3. Please disconnect this equipment from connecter before cleaning. Don‘t use liquid or sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning. 4. Make sure the voltage of the power source when you try to connect the equipment to the power outlet. 5. All cautions and warnings on the equipment should be noted.
17.
17.
17.0 TFT Active Matrix LCD Panel User Manual Unpacking Thank you for your purchase. Please first check the following package content of the 17” LCD monitor. Contact your dealer or store where you purchased the LCD monitor if anything is missing. 17” TFT LCD Monitor External Univ15 pin D-sub (RGB Analog) input signal cable *DVI.
17.0 TFT Active Matrix LCD Panel User Manual Optional TV Tuner The 17” LCD monitor optionally supports TV tuner function with the following accessories . It can be purchased separately. Contact your dealer for detail. Optional TV Tuner S-Video Cable Composite Cable Europ PAL System I to I Dungle U.S. NTSC System PH to F Dungle RCA to Phone Jack Cable Remote Control Remote Control Use the remote control by point toward the IR sensor window. Notice: 1.
17.0 TFT Active Matrix LCD Panel User Manual Cleaning Notes 1. 2. 3. 4. Be gentle to clean the screen. Never use any kind of corrosiveness chemical dissolvent to clean the screen, it may hurt your screen surface. We suggest that a camel hair brush or a soft, lint-free cloth be used to clean the screen. Don’t exert any pressure directly to the LCD screen. Precaution 1. 2. 3. 4. 5. 6. 7. Do not expose the monitor to direct sunlight or heat. Do not spill liquid on the monitor.
17.0 TFT Active Matrix LCD Panel User Manual Hardware Installation Be careful to your LCD monitor. It’s very delicate and easy to break. Turn off LCD’s and PC’s power before installation. Follow the installation step by step described below. Input 【1】 【2】 【3】 【4】 【7】 【5】 【6】 【1】DC-IN:This is for connecting the power cable 【2】AUDIO-IN:This can be connected to the audio-out connector of any sound resource. 【3】VGA-IN : This can be connected with the D-Sub 15 pin signal cable.
17.0 TFT Active Matrix LCD Panel User Manual Hardware Installation Step by Step 1. Turn your monitor upside down carefully with panel facing you to locate all connector port. 2. Plug in signal cable to VGA-IN of the monitor and the other side of the cable to the computer. 3. Connect the audio cable to AUDIO-IN on the monitor, and the other side to computer line out.
17.0 TFT Active Matrix LCD Panel User Manual Hardware Installation Step by Step 4. Plug power cord onto DC adapter. 5. Plug the DC cable from power adapter onto the DC-IN on monitor. 6. Congratulations! You have just completed the hardware installation. Hardware Installation TV Tuner (Option) 1. Hardware installation for optional TV tuner of the 17” TFT LCD monitor is described below.
17.0 TFT Active Matrix LCD Panel User Manual Hardware Installation TV Tuner (Option) 2. First, remove the plastic back cover by pushing clips in two sides . 3. Locate pin connector on the TV tuner and the pin connector on monitor indicated. 4. Slide the TV tuner module into the right side of the spare space of the back of monitor, and gently plug the optional TV tuner into the connector mentioned at Step 3 .
17.0 TFT Active Matrix LCD Panel User Manual Hardware Installation TV Tuner (Option) 5. Screw to fix TV tuner module on the supporting sheet metal and re-install the color back panel. 6. Insert the RCA video signal cable into VIDEO port, and the other side to RCA Video output on sources such as DVD player………. 7. Insert the S-Video signal cable into S-IN port, and the other side to S-Video output on sources such as DVD player………. 8.
17.
17.0 TFT Active Matrix LCD Panel User Manual Monitor Setup Button Menu control button Auto Adjust OSD Menu Power Down There 5 keys for user to set up the monitor, including “ Up Power”, “MENU “, “AUTO”, ” <▼> Down”, ” <▲> Up”. Please refer to the introduction below. 1. “ Power”: Turn the LCD power on and off. When the power is on, the light 4. turns green, and standby in the color of orange. “AUTO”: Exit and save the setting. Hot key for auto adjustment.
17.0 TFT Active Matrix LCD Panel User Manual Troubleshooting If you encounter any trouble in using the monitor, make sure your monitor is properly installed according to the following steps before you call for service. ˙ There is no picture on the screen. Check: 1. Power saving mode. Press any key and move the mouse to deactivate the mode. 2. Signal Cable Connector Pins. If there are bent or missing pins, consult your dealer or store where you purchased the monitor.
.0 TFT Active Matrix LCD Panel User Manual OSD (On-Screen Display) Menu Mode (PC Mode) Contrast: Adjust the difference between light and dark area. Main menu contrast adjust Clock: Adjust the frequency of the pixel. Main menu clock adjust Phase: Adjust the phase of pixel clock.
17.0 TFT Active Matrix LCD Panel User Manual OSD (On-Screen Display) Menu Mode (PC Mode) H-Position: Adjust the horizontal position of the display. Main menu H position adjust V-Position: Adjust the vertical position of display. Main menu V position adjust Volume : Adjust of speaker.
17.0 TFT Active Matrix LCD Panel User Manual OSD (On-Screen Display) Menu Mode (PC Mode) RGB : Adjust the color temperature. Main menu color temp. adjust EXIT OSD: Save and leave OSD Main menu EXIT adjust H-Position:Adjust the horizontal position of the OSD . V-Position:Adjust the vertical position of the OSD.
17.0 TFT Active Matrix LCD Panel User Manual OSD (On-Screen Display) Menu Mode (TV/CATV Option) Option select 1. Press the MENU button to access menu to select TV or CATV. 2. Using MENU again for advanced adjustment selection (channel selection is included). 3. Press Down and Up for choosing different OSD function. 4. Press MENU as enter to select the function you want. Brightness: Adjust the brightness of the display. Video menu luminance brig.
17.0 TFT Active Matrix LCD Panel User Manual OSD (On-Screen Display) Menu Mode (TV/CATV Option) Tint: Adjust the tint. Video menu HUE Sharpness : Adjust the sharpness. Video menu TV-Monitor Volume : Adjust of speaker.
17.0 TFT Active Matrix LCD Panel User Manual OSD (On-Screen Display) Menu Mode (TV/CATV Option) CH Searching:Channel select CH Edit:Channel select edit CH Fine Tune:Channel adjustment AIR-CABLE : Ant. / CATV input switching Video menu EXIT. EXIT OSD: Save and leave OSD H-Position:Adjust the horizontal position of the OSD . V-Position:Adjust the vertical position of the OSD.
17.0 TFT Active Matrix LCD Panel User Manual Display Mode Incoming Display Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 640X350 (50Hz) 31.5KHz 50.0Hz 640X350 (60Hz) 31.5KHz 59.9Hz 640X350 (70Hz) 31.5KHz 70.1Hz 720X400 (50Hz) 31.5KHz 50.0Hz 720X400 (60Hz) 31.5KHz 59.9Hz 720X400 (70Hz) 31.5KHz 70.1Hz 640X480 (50Hz) 31.5KHz 50.0Hz 640X480 (60Hz) 31.5KHz 59.9Hz 640X480 (66Hz) 35.0KHz 66.7Hz 640X480 (72Hz) 37.9KHz 72.8Hz 640X480 (75Hz) 37.5KHz 75.
17.0 TFT Active Matrix LCD Panel User Manual Specification LCD Panel Type Viewing Angle Contrast Ratio Brightness Response Time Display Colors Max Resolution Pixel Pitch 17.0” TFT Active Matrix LCD Display H:140° , V:130° 400 : 1 (Max), 350 : 1(Typical) 300 cd/m2 (Max) 16 ms(Typical) 16.7M colors 1280X1024(SXGA) 0.264mm(H)x0.264mm(V) Input Signals RGB Analog Video Level:0.