USB 3.
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual Contents: Chapter 1: Introduction .................................... 3 1.1 Product Introduction ...................................................... 3 1.2 Features ........................................................................ 3 1.3 System Requirements ................................................... 4 1.4 Package Contents ......................................................... 4 Chapter 2: Getting Started ....................
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual Chapter 1: Introduction 1.1 Product Introduction Thank you for purchasing Rosewill’s RNG-406U. This USB 3.0 to Gigabit Ethernet Adapter add a single RJ-45 Ethernet networking port to a USB enabled (USB 3.0) computer system with link speeds up to 1000 Mbps. Backwards compatible with USB 2.0 computer system and 10/100 Mbps Ethernet networks, this compact and portable adapter is ideal as a desktop replacement network adapter or laptop accessory. 1.
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual Ethernet cable is unplugged Supports Wake-on-LAN Upstream port: USB 3.0 type A Downstream port: RJ45 LEDs indicate the status of Power status and Ethernet connection Supports Windows® XP/Vista/7/8 (32/64 bit); Mac OS X 10.6/10.7/10.8 1.3 System Requirements Windows® XP/Vista/7 (32/64 bit); Mac OS X 10.5 or later Available USB 2.0 port (Recommend USB 3.0 port) 1.4 Package Contents 1 x RNG-406U - USB 3.
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual Chapter 2: Getting Started 2.1 Hardware Installation 1. Plug the USB 3.0 to Gigabit Ethernet Adapter directly into an available USB 2.0 port (Recommend USB 3.0 port) on your computer. 2. Connect one end of your network cable into the RJ45 port of USB 3.0 to Gigabit Ethernet Adapter. 3. Connect the other end of the network cable into an available Ethernet port on your router, switch, or any other networking device. 2.
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual *Note: Actual image may vary Note: If the install program doesn’t run automatically, please locate and double-click on the Autorun.exe file in the CD to launch the install program. 2. Please click “USB 3.0 1000M”. *Note: Actual image may vary 3. Follow the instructions on screen to install the driver.
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual 2.2.2 Installation for Mac OS X 10.5 or Later 1. Insert the provided CD into your CD-ROM drive. 2. Double-click the “Ethernet Adapter” disc icon, double-click “Drivers” folder. *Note: Actual image may vary 3. Double-click “USB 1000M” folder, and then double click the “USB 3.0 1000M” folder, then click “For Mac OS X 10.6/10.7/10.8” file to launch the installer.
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual *Note: Actual image may vary 4. Follow the instructions on screen to install the driver. After driver installation is complete, you must restart your computer. 2.3 Hardware Verify 2.3.1 Verifying for Windows 1. Click on the “Device Manager” tab in the Windows Control Panel.
USB 3.0 Gigabit Ethernet Adapter 2. - RNG-406U- User’s Manual Entry “Network adapters” item, and you can read “ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter” in the Device Manager.
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- 2.3.2 Verifying for Mac OS X User’s Manual 10.5 or Later 1. Choose About this Mac from the Apple menu. 2. Click on More Info… 3. In the Contents sidebar select USB from the Hardware section. 4. Scroll the list to reveal the USB 3.
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual Appendix A: Specification Spec Chipset Asix AX88179 Standards IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3az(Energy Efficient Ethernet) Speed 10/100/1000Mbps Connectors 1 x RJ45 Interface USB 3.0 LEDs Link, Activity Dimension Adapter: 2.56 x 1.1 x 0.71 in (65 x 28 x 18 mm); Cable Length + USB Connector 21.26 in (540 mm) Weight 0.11 lb (50 g) Thank you for purchasing a quality Rosewill Product.
