4 Port Super Speed USB3.
4 Port Super Speed USB3.0 Hub RHB-620 User Manual Production Instruction: This USB3.0 HUB is a 4 ports Hub used to bridge the USB3.0 & USB 2.0 interface peripherals to your desktop or laptop by providing one upstream port and 4 downstream ports. This Hub complies with USB Spec. V1.1a；V2.0 and v3.0. It offers you the flexibility of 4 data rates: 1.5Mbps (low-speed), 12Mbps (full-speed), 480Mbps (high-speed) and 5Gbps for super-speed devices. Features: 1. Compliant with USB Specification Rev. 3.
4 Port Super Speed USB3.0 Hub RHB-620 User Manual Specifications: Material Plastic Standards USB3.0/2.0/1.1a Power Mode Self-power mode / Bus-power mode USB3.0 A/F downstream*4. USB Connectors USB3.0 Micro B/F upstream*1. USB2.0 Mode: Windows 2000/XP/Vista/7, OS supports Linux Kernel 2.6.31 + Mac OS 10.0+ USB3.0 Mode: Windows XP/Vista/7 Linux Kernel 2.6.31+ Data Transfer Rate 1.5/12/480Mbps and 5Gbps USB3.0 BUS Power DC 5V/900mA AC Adapter Input：AC100-240V;Output: DC5V/3.
Port Super Speed USB3.0 Hub RHB-620 User Manual System Requirements: 1. A USB3.0 host controller installed on the computer. You can’t enjoy the super speed if your PC doesn’t support USB3.0. 2. OS support: Win2000/XP/Vista/7, Linux, and Mac OS 10.0+. 3. Recommend using Intel Pentium 4 or above system. Installation: 1. Plug the Switching Adapter’s DC plug into “DC 5V” JACK， LED lighting. 2. Plug the USB3.0 cable’s Micro B/M connector into the “Upstream”. 3. Plug the USB3.
4 Port Super Speed USB3.0 Hub RHB-620 User Manual approximately one minute to allow the installation to complete automatically. 3. To operate the product smoothly, please make sure that the AC adapter is plugged in when using the product. 4. In order to enjoy the super speed of 5Gbps, your PC host and OS must fully support USB3.0; otherwise it can only reach the speed of USB2.0 standard. 5. Please un-plug the hub and turn the power off if not use it for a long time. 6.
