CARD READER RCR103 USER’S Manual
CARD READER RCR103 USER’S Manual Feature Hardware Introduction 6 LED indicator 1. USB port for plugging into any USB device 2. Slot for SD, MMC and RS-MMC cards 3. Slot for Memory Stick, Memory Stick PRO, Memory Stick Due and Memory Stick PRO Due cards• Fully compliant with USB 2.0 4. Slot for Compact Flash cards and MicroDrive 5. Slot for Smart Media cards 6.
CARD READER RCR103 USER’S Manual Software Installation If your operation system if Windows 95/98/98SE, please install the driver. 1. Put the CD packed with the RCR-103 into the CD-ROM drive. 2. The InstallShield Wizard will be popped out. Please follow the on-screen introduction to finish the installation. Change the front panel 1. Remove the upper cover of the RCR-103. 2. Apply a suitable size of the screwdriver with the flat head and insert the screwdriver into the gap showed on the picture.
