User manual

1
Programme selector dial Turn the programme selector dial to the required programme. The
selector dial can be turned either clockwise or counter-clockwise.
The green pilot light of the button 6 starts flashing: the appliance is now
switched on.
If you turn the programme selector dial to another programme
when the appliance is working, the red pilot light of the button 6 will
flash 3 times to indicate a wrong selection. The appliance will not perform
the new selected programme.
•To switch the appliance off, turn the programme selector dial to the
position
.
•To cancel or change a running programme, switch the appliance off
by turning the programme selector dial to the position
. Select the
new programme by turning the selector to the desired programme.
Start the new programme by pressing the button 6 again. The water in
the tub will be not emptied out.
2
Temperature button
95°
60°
40°
30°
Push the temperature button to select the most suitable tempera-
ture for washing your laundry .
: Cold wash.
3
Automatic Spin reduction
and Rinse Hold
By selecting a programme, the appliance proposes automatically the
maximum spin speed provided for that programme.
By selecting Automatic Spin reduction the spin speed is reduced to a
half, but not less than 400 rpm. The relevant light (
) illuminates.
Rinse Hold
By selecting this function the water of the last rinse is not emptied out to
prevent the fabrics from creasing. Before opening the door it will be nec-
essary to empty out the water.
To empty out the water, please read the paragraph «At the end of
the programme».
4
Super Quick By pressing this button the corresponding pilot light illuminates.
Short cycle for lightly soiled items or for laundry which needs only fresh-
ening up.
With this option, a reduced load of laundry is recommended:
• Cottons 3 kg
• Synthetics and delicates 1,5 kg
14