User manual

Clean the condenser (black grill) and the compressor at
the back of the appliance with a brush. This operation
will improve the performance of the appliance and save
energy consumption.
Important! Take care of not to damage the cooling
system.
Important! When moving the cabinet, lift it by the front
edge to avoid scratching the floor.
Many proprietary kitchen surface cleaners contain
chemicals that can attack/damage the plastics used in
this appliance. For this reason use a soft cloth rinsed in
warm water and neutral soap emulsion for cleaning ex-
ternal surfaces.
Important! Do not use detergents or abrasive paste as
these will damage the paint, or stainless steel anti
finger print coating.
After cleaning, reconnect the equipment to the mains
supply.
Cleaning the ventilation grille
The ventilation grille can be
removed to wash the grille.
Make sure the door is open
when removing the ventila-
tion grille:
1. Loosen the upper
edge of the grille by
pulling outward/down-
ward.
2. Pull the grille straight out to completely remove it.
3. Vacuum clean under the cabinet.
Defrosting of the freezer
The freezer compartment of this model, on the other
hand, is a "no frost" type. This means that there is no
buildup of frost when it is in operation, neither on the
internal walls nor on the foods.
The absence of frost is due to the continuous circula-
tion of cold air inside the compartment, driven by an au-
tomatically controlled fan.
Periods of non-operation
When the appliance is not in use for long periods, take
the following precautions:
1. disconnect the appliance from electricity supply
2. remove all food
3. clean the appliance and all accessories
4. leave the door/doors open to prevent unpleasant
smells.
Important! If the cabinet will be kept on, ask somebody
to check it once in a while to prevent the food inside
from spoiling in case of a power failure.
What to do if…
During operation of the appliance some smaller but an-
noying trouble can often occur, which does not require
calling a technician out. In the following chart informa-
tion is given about them to avoid unnecessary charges
on service.
Important! The operation of the appliance goes with
certain sounds (compressor and circulating sound).
This not means a trouble, but a normal operation.
Important! The appliance operates discontinuously, so
the stopping of compressor does not mean being no
current. That is why you must not touch the electrical
parts of the appliance before breaking the circuit.
Problem Possible cause Solution
The appliance is noisy. The appliance is not supported prop-
erly.
Check if the appliance stands stable
(all feet and wheels should be on the
floor). Refer to "Levelling".
8