User manual

• This product must be serviced by an authorized
Service Centre, and only genuine spare parts must
be used.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its refrig-
erant circuit or insulation materials. The appliance shall
not be discarded together with the urban refuse and
rubbish. The insulation foam contains flammable gases:
the appliance shall be disposed according to the appli-
cable regulations to obtain from your local authorities.
Avoid damaging the cooling unit, especially at the rear
near the heat exchanger. The materials used on this
appliance marked by the symbol
are recyclable.
Control panel
1 2 3
45
1
Temperature indicators
2
Fast Freeze light
3
Alarm light
4
Alarm reset button /
Fast freeze button
5
ON/OFF /
Temperature set button
Switching on
Insert the plug into the wall socket.
If the Temperature indicator is not illuminated, press
ON/OFF button.
If the temperature inside the appliance is too warm the
Alarm light will flash and the Alarm buzzer starts.
Press the Alarm reset button to switch off the Alarm
buzzer.
Switching off
1. Press the ON/OFF button for few seconds.
2. All Temperature indicators will light up and then
count down in 3 steps.
3. Disconnect the mains plug from the mains socket
to disengage the appliance completely.
Temperature regulation
1. Press the Temperature set button.
The temperature indicator will flash.
2. Select a new temperature by pressing the Tem-
perature set button repeatedly.
3. The Temperature indicator will stop flashing after
a while.
The temperature indicator shows the set temperature.
The set temperature will be reached within 24 hours.
Keep in mind that the temperature inside the appliance
also depends on:
• room temperature
• how often the door is opened
• quantity of food stored
• location of the appliance.
Fast Freeze function
1. Press the Fast Freeze button.
2. The Fast Freeze light will light up.
4