User manual

• Loosen the drainage
channel from its resting
position, push it in ac-
cording to the illustration
and place it in the bot-
tom freezer drawer
where water can collect
• carefully scrape off the
ice when it starts to
thaw. Use a wood or a plastic scraper
• when all the ice has melted, clean and wipe the cab-
inet dry, then put the drainage channel back in place.
• switch on the cabinet, insert the plug into the wall
socket and replace the frozen foodstuff.
Important! Never use sharp metal tools to scrape off
frost from the evaporator as you could damage it. Do
not use a mechanical device or any artificial means to
speed up the thawing process other than those
recommended by the manufacturer. A temperature rise
of the frozen food packs, during defrosting, may
shorten their safe storage life.
Periods of non-operation
When the appliance is not in use for long periods, take
the following precautions:
1. disconnect the appliance from electricity supply
2. remove all food
3. defrost and clean the appliance and all accessories
4. leave the door/doors open to prevent unpleasant
smells.
Important! If the cabinet will be kept on, ask somebody
to check it once in a while to prevent the food inside
from spoiling in case of a power failure.
What to do if…
During operation of the appliance some smaller but
annoying trouble can often occur, which does not re-
quire calling a technician out. In the following chart in-
formation is given about them to avoid unnecessary
charges on service.
Important! The operation of the appliance goes with
certain sounds (compressor and circulating sound).
This not means a trouble, but a normal operation.
Important! The appliance operates discontinuously,
so the stopping of compressor does not mean being no
current. That is why you must not touch the electrical
parts of the appliance before breaking the circuit.
Problem Possible cause Solution
The appliance is noisy.
The appliance is not supported prop-
erly.
Check if the appliance stands stable
(all feet and wheels should be on the
floor). Refer to "Levelling".
The cushion spacers located be-
tween the back of the cabinet and the
pipes come loose.
Put them back in place again.
The buzzer sounds. The
Alarm light flashing.
The temperature in the freezer is too
high.
Refer to "Temperature Alarm"
Pilot light flashing.
An error has occurred in measuring
the temperature.
Call your service representative (the
cooling system will continue to keep
food products cold, but temperature
adjustment will not be possible).
The compressor runs contin-
uously.
The Temperature regulator may be
set incorrectly.
Set a warmer temperature.
9