User manual

Levelling
When placing the appli-
ance ensure that it
stands level. If necessary
adjust the feet using the
adjustment spanner sup-
plied.
Door alignment is de-
pendent on proper level-
ling.
Door reversibility
To change the opening direction of the door, do these
steps:
1. Remove the plug from the power socket.
2. Remove the ventilation grille. Remove the filling
and install it on the opposite side of the grille.
3. Lay down the appliance back side down on a
wooden support.
4. Unscrew the
lower hinge and
change the posi-
tion of the pin.
Remove the low-
er door.
5. Unscrew the
middle hinge
(b2) and remove
the upper door.
Remove the hole
covers (b1) by
driving a drift into
them and rock-
ing them loose.
Install the hole covers provided within the acces-
sory bag on the opposite side.
6. Disassemble the
door closing de-
vices (c1, c2) by
unscrewing the
screw (c3). Re-
verse the door
closing device
(c1, c2), move to
the opposite side
of the other door and fix by screwing in the screw
(c3). Move the hole cover (c4) to the opposite side
of the door.
7. Unscrew and
move the pin to
the opposite side
and re-insert the
upper door.
8. Install the middle
hinge on the op-
posite side.
9. Install the lower
door and screw the lower hinge.
10. Tighten the pin.
Make sure that
the doors are
aligned and
blocked by the
lock-nut.
11. Raise the appli-
ance and install
the ventilation
grille.
12. Unscrew the
handle. On the
opposite side re-
move the hole
covers by driving
a 3-4 mm drift or
drill into them. In-
stall the handle.
Install the hole
covers provided within the accessory bag.
13. Put the cabinet in position.
Warning! Reposition, level the appliance, wait
for at least four hours and then connect it to the
power socket.
Do a final check to make sure that:
13