User manual

• Unscrew the handle. On

the opposite side re-

move the hole covers by

driving a 3-4 mm drift or

drill into them. Install the

handle.

Install the hole covers

provided within the ac-

cessory bag.

• Put the cabinet in position.

Warning! Reposition, level the appliance, wait for

at least four hours and then connect it to the

power socket.

Do a final check to make sure that:

• All screws are tightened.

• The edges of the doors run parallel to the side edge

of the appliance.

• The magnetic seal adheres to the cabinet.

• The door opens and closes correctly.

Warning! If the ambient temperature is cold (i.e.

in Winter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the

gasket.

Environmental concerns

Recycle the materials with the symbol . Put the

packaging in applicable containers to recycle it.

Help protect the environment and human health and to

recycle waste of electrical and electronic appliances.

Do not dispose appliances marked with the symbol

with the household waste. Return the product to your

local recycling facility or contact your municipal office.