User manual

ManualsBrandsROSENLEW ManualsDomestic AppliancesRJKL4150

Removing the transport support

Your appliance is equipped with transport support to

secure the door during transportation.

To remove them do these steps:

1. Open the door.

2. Remove the trans-

port support from

the door sides.

3. Remove the trans-

port support from

the lower hinge

(some models).

Important! Some models are fitted with a silencing

pad under the cabinet. Do not remove this pad.

Spacers

Install the spacers provided within the accessory bag

as shown in the figures.

Place the spacers on the brackets of the condenser

(the black grill) at the back of the appliance.

Levelling

When placing the appli-

ance ensure that it

stands level. If necessary

adjust the feet using the

adjustment spanner sup-

plied.

Door alignment is de-

pendent on proper level-

ling.

Door reversibility

To change the opening direction of the door, do these

steps:

• Remove the plug from the power.

• Remove the ventilation grille. Remove the filling and

install it on the opposite side of the grille.

• Lay down the appliance back side down on a wood-

en support.

• Unscrew the lower hinge (a1).

• Remove the door closure device from the hinge and

move the pin to the other side. Re-screw the door

closure device provided within the accessory bag.

• Unscrew and move the pedal to the other side (a3).

• Remove the door closure device on the door (b1).

• Unscrew and move the bracket (b2) to the other

side.

• Re-screw the door closure device provided within

the accessory bag to the other side (b3).

• Remove the door.

• Unscrew and move the

pin to the other side.

• Re-insert the door.

• Re-screw the lower

hinge.

• Raise the appliance and

install the ventilation

grille.