User manual

• Lay down the appliance back side down on a wood-
en support.
• Unscrew the lower hinge (a1).
• Remove the door closer device from the hinge and
move the pin to the other side. Re-screw the door
closer device provided within the accessory bag.
• Unscrew and move the pedal to the other side (a3).
• Remove the door closer device on the door (b1).
• Unscrew and move the pedal to the other side (b2).
• Re-screw the door closer device provided within the
accessory bag.
• Remove the door.
• Unscrew and move the
pin to the other side.
• Re-insert the door.
• Re-screw the lower
hinge.
• Raise the appliance and
install the ventilation
grille.
• Unscrew the handle.
• On the opposite side re-
move the hole covers by
driving a 3-4 mm drift or
drill into them.
• Install the handle in the
opposite order.
• Put the cabinet in posi-
tion.
Warning! Reposition, level the appliance, wait
for at least four hours and then connect it to the
power socket.
Do a final check to make sure that:
• All screws are tightened.
• The edges of the doors run parallel to the side edge
of the appliance.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
Environmental concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local council, your
household waste disposal service or the shop where
you purchased the product.
12