User manual

Control panel
1 Pilot light
2 Temperature regulator
Switching on
Insert the plug into the wall socket.
Turn the Temperature setting regulator clockwise to a
medium setting.
The Pilot light will light up.
Switching off
To turn off the appliance, turn the temperature regulator
to the O position.
The Pilot light will switch off.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• turn the Temperature regulator counter clockwise to
obtain warmer storage temperature.
• turn the Temperature regulator clockwise to obtain
colder storage temperature.
A medium setting is generally the most suitable.
The exact setting should be chosen keeping in mind
that the temperature inside the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Important! If the ambient temperature is high or the
appliance is fully loaded, and the appliance is set to the
lowest temperatures, it may run continuously causing
frost to form on the rear wall. In this case the
Temperature regulator must be set to a higher
temperature to allow automatic defrosting and
therefore reduced energy consumption.
First use
Cleaning the interior
Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm wa-
ter and some neutral soap so as to remove the typical
smell of a brand-new product, then dry thoroughly.
Important! Do not use detergents or abrasive pow-
ders, as these will damage the finish.
Check that the drain hose
at the rear of the cabinet
discharges into the drip
tray.
Daily use
Temperature indicator
To assist you in controlling your appliance correctly we
have fitted a temperature indicator to your refrigerator,
placed in the coldest area.
The arrow shows the location of the coldest area of your
refrigerator.
4