User manual

X suitable
-- not suitable
Activating and deactivating the microwave
Caution! Do not let the microwave
operate if there is no food in it.
1. Press once.
2. Press the Setting pads to set the time.
3. Press once.
4. Press the Setting pad number for the power level
you want to use.
The default microwave setting is 100 % power.
To cancel the settings press
.
5. Press to confirm and activate the microwave.
You can change the power level
while the microwave is operating.
Press and the current power
level flashes for a few seconds.
Press during this time the Setting
pad number for the power level you
want to use.
To check the time when the
microwave operates, press and
the current time shows on the
display.
To deactivate the microwave:
• wait until the microwave deactivates automatically,
when the time comes to an end.
• open the door. The microwave stops automatically.
Close the door and press to continue to cook.
Use this option to inspect food.
• press .
When the microwave deactivates
automatically, an acoustic signal sounds.
Power setting table
Press Setting pad Display Approximate Percentage of Power
0 PL 0 0 %
1 PL 1 10 %
2 PL 2 20 %
3 PL 3 30 %
4 PL 4 40 %
5 PL 5 50 %
6 PL 6 60 %
7 PL 7 70 %
8 PL 8 80 %
9 PL 9 90 %
10 PL 10 100 %
9