User manual

Operation
Control panel
1 2 3 4 5 6
1
Freezer temperature regulator
2
Alarm light
3
Power indicator light
4
QuickFreeze indicator
5
QuickFreeze / Alarm reset button
6
Fridge temperature regulator
Switching on
1. Insert the electrical plug into the wall socket.
The power indicator light will light up.
2. Turn on the fridge.
Refer to 'Switching on the fridge'.
3. Turn on the freezer.
Refer to 'Switching on the freezer'.
Switching on the fridge
To switch on the fridge turn the fridge temperature
regulator clockwise to a medium setting.
Switching on the freezer
To switch on the freezer turn the freezer temperature
regulator clockwise to a medium setting.
Switching off
1. Turn off the fridge.
Refer to 'Switching off the fridge'.
2. Turn off the freezer.
Refer to 'Switching off the freezer'.
3. Disconnect the electrical plug from the wall socket.
The power indicator light will switch off.
Switching off the fridge
To turn off the fridge turn the fridge temperature
regulator clockwise to the 'O' position.
Switching off the freezer
To turn off the freezer turn the freezer temperature
regulator clockwise to the 'O' position.
Temperature regulation
The temperature is automatically regulated.
If the ambient temperature is high or the
appliance is fully loaded, and the
appliance is set to the lowest
temperatures, it may run continuously
causing frost to form on the rear wall. In
this case the knobs must be set to a
higher temperature or activate the
QuickFreezeto allow automatic
defrosting and therefore reduced energy
consumption.
Set the Temperature regulator to higher or lower
settings to obtain the required coldness.
A medium setting is generally the most
suitable.
However, the exact setting should be chosen keeping in
mind that the temperature inside the appliance depends
on:
• room temperature;
• how often the door is opened;
• the quantity of food stored;
• the location of the appliance.
6