User manual

7
8
12. Place the lower door on the lower hinge pivot (9).
13. Screw off the middle cover plugs and screw them
into the hole on the opposite side (10).
14. Put the middle hinge on the opposite side and fix it
with the screws (11).
10
9
180
o
11
15. Place the upper door on the middle hinge pivot
(12).
16. Fix the door with upper hinge and fix it with screws
of it (13).
12
13
17. Remove the door handle covers (3). Remove the
cover pins (1).
18. Unscrew the upper and lower handles, reverse and
fix them on the opposite side (2).
2
2
3
3
1
1
19. Re-insert the cover pins (that can be found in the
instruction for use bag) on the opposite side.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the
cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket. In case you
do not want to carry out the above
mentioned operations, contact the
nearest After Sales Service Force. The
After Sales Service specialist will carry
out the reversibility of the doors at your
cost.
Technical information
Technical data
Height mm 1845
Width mm 595
Depth mm 642
Rising time Hours 26
15