User manual

Levelling
When placing the appliance ensure that it stands level.
This can be achieved by two adjustable feet at the
bottom in front.
Electrical connection
• Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond to
your domestic power supply.
• The appliance must be earthed. The power supply
cable plug is provided with a contact for this
purpose. If the domestic power supply socket is not
earthed, connect the appliance to a separate earth
in compliance with current regulations, consulting a
qualified electrician.
• The manufacturer declines all responsibility if the
above safety precautions are not observed.
• This appliance complies with the E.E.C. Directives.
Door reversibility
Warning! Before carrying out any
operations, remove the plug from the
power socket.
Caution! To carry out the following
operations, we suggest that this be made
with another person that will keep a firm
hold on the doors of the appliance during
the operations.
1. Open the door and empty the shelves.
2. Unscrew the screws of the upper hinge (1).
2
1
3. Remove the door from the middle hinge pivot (2).
4. Place the cover of the upper hinge into the holes on
the opposite side.
5. Screw off the screws of the middle hinge (3).
6. Remove the plugs on the upper side of both doors
and move them to the other side.
7. Remove the lower door from the lower hinge pivot
(4).
4
3
8. Screw off the pivot of the lower hinge (5) and screw
the lower hinge pivot (6) into the left drill of the
lower hinge.
5
6
9. Screw off the screws of the lower hinge and
remove the hinge (8).
10. Screw off the lower cover plugs and screw them
into the hole on the opposite side (7).
11. Put the lower hinge on the opposite side and fix it
with the screws (8).
14