Manual

- 11 -
7. Firmware update
The firmware version installed in your mif 4 is displayed for two
seconds every time the unit is powering up.
To update the firmware you need a PC running Windows XP or later.
Please visit www.rosendahl-studiotechnik.com and download the
newest mif 4 firmware utility.
Connect the unit to a USB port while holding down both keys.
This will enter bios update mode indicated by both keys illuminated
red and the LED display blanking.
Now start the software and select the midi I/O ports. In Windows XP
you must select the USB audio device, Vista or Windows 7 will list
mif 4.
A valid bidirectional midi communication will detect and show the
actual firmware version.
Press the PROGRAM buttom to start the firmware update.
Please do not disconnect the unit during the update process.