Datasheet
Table Of Contents
- All dimensions are in mm; tolerances according to ISO 2768 m-H
- According to IEC 60169-15; EN 122110; MIL-STD-348A, Fig. 310
- N/A
- Connector parts Material Plating
- Center contact
- Outer contact
- Dielectric
- Coupling nut
- Gasket
- Substrate AlR2ROR3R
- Impedance 50 (
- Frequency range DC to 18 GHz
- Return loss ( 28.3 dB, DC to 4 GHz
- ( 26.4 dB, 4 GHz to 6 GHz
- ( 24.3 dB, 6 GHz to 10 GHz
- ( 23.1 dB, 10 GHz to 12.4 GHz
- ( 22.1 dB, 12.4 GHz to 14 GHz
- ( 19.1 dB, 14 GHz to 18 GHz
- Center contact resistance ( 3 m(
- Outer contact resistance ( 2 m(
- Impulse Power (1(s, 1%) 100 Watts at 25 C environment temperature
- Power handling ( 1 W at 25 C
- Mating cycles ( 500
- Coupling nut retention ( 270 N
- Maximum torque 1.70 Nm
- Recommended torque 0.80 Nm to 1.10 Nm
- Temperature range -55 C to +155 C
- RoHS compliant
- Standard 100 pcs in blister
- Weight 3.4 g/pce

Technical Data Sheet
SMA
Standard
Termination
Plug 1 Watt
32S15R-1.0E3
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Fax : +49 8684 18-499
Email : info@rosenberger.de
Page
2 / 2
RF_35/05.10/6.0
Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG
Electrical data
Impedance 50 Ω
Frequency range DC to 18 GHz
Return loss ≥ 28.3 dB, DC to 4 GHz
≥ 26.4 dB, 4 GHz to 6 GHz
≥ 24.3 dB, 6 GHz to 10 GHz
≥ 23.1 dB, 10 GHz to 12.4 GHz
≥ 22.1 dB, 12.4 GHz to 14 GHz
≥ 19.1 dB, 14 GHz to 18 GHz
Center contact resistance ≤ 3 mΩ
Outer contact resistance ≤ 2 mΩ
Impulse Power (1µs, 1%) 100 Watts at 25 °C environment temperature
Power handling
≤ 1 W at 25 °C
Mechanical data
Mating cycles ≥ 500
Coupling nut retention ≥ 270 N
Maximum torque 1.70 Nm
Recommended torque 0.80 Nm to 1.10 Nm
Environmental data
Temperature range -55 °C to +155 °C
RoHS compliant
Packing
Standard 100 pcs in blister
Weight 3.4 g/pce
Draft Date Approved Date Rev. Engineering change number Name Date
Kerstin Herzog 14/02/05 Lars Ramtke 25/07/13 b00 13-0822 Marion Striegler 25/07/13
While the information has been carefully compiled to the best of our knowledge, not
hing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve
our
products, we reserve the right to make changes judged to be necessary.


