User's Manual

User Manual
Rosenberger Active Das With Intelligent Antenna system
- 38 -
Parameter Description Input Method
Phone Number Configure the phone
number which is used to
connect the device in
remote mode.
The phone number must
match with the SIM install
on the device.
Enter the phone number
in the text box.
Device Factory Indicates the manufacturer
of the device.
Enter the manufacturer
in the text box.
Site Location Indicates the detailed
installation address of the
adding device.
Enter the address in the
text box.
Device Type Indicates the type of the
device.
Select the repeater type
from drop down list box.
Communication
Mode
Indicates the
communication mode of
the device.
The communication mode
must be the same as that
set on the adding device.
After selected a mode,
click Test to check whether
the communication is
normal.
Select the
communication mode
from the dropdown list
box.
For the configuration of
the popup page.
Protocol Type Indicates the supported
protocol.
Select the protocol from
drop down list box.
3. Click
to enter the Slave Properties page, as shown in Figure 20.