User's Manual

User Manual
Rosenberger Active Das With Intelligent Antenna system
- 35 -
For the description of device, see Table.
Figure 35 Configure Parameter
Table7 Parameter Description of Creating New Device
Parameter Description Input Method
Device No. Indicates the unique code
for each repeater.
Enter a unique number in
the text box.
Sub No. It is the equipment type.  When the adding
device is a single device,
select FF from the drop
down list box.
 When the adding
device has sub device,
select 00.
Site Name It is recommended a name
associated with the
installation site. It is also
used for identifying the
location of the repeater
and displayed on the
device list.
Enter a site name in the
text box.