ROSEN ENTERTAINMENT SYSTEMS, LLC 1120 California Avenue Corona, CA 92505, USA T: +1 951 898-9808 F: +1 951 898-9897 www.rosenentertainment.com Sales, Service and Support: Customer Service: +1 866 467-6736 Technical Support: +1 888 883-2790 info@rosenentertainment.com techelp@rosenentertainment.
VoiceCom 1000™ Table of Contents Table of Contents Introduction ................................................................................…...... 5 Safety Instructions ...................................................................…....... 5 Getting Started 6 ................................................................................ Operating the VoiceCom 1000™ System ....................…........ 6 Interactive Voice Control .......................................................
VoiceCom 1000™ Welcome Thank you very much for purchasing the VoiceCom 1000™ from ROSEN ENTERTAINMENT SYSTEMS (ROSEN). This universal hands-free mobile phone car kit is an important contribution to road safety and the convenient hands-free use of your mobile phone while driving. To increase operating convenience the VoiceCom 1000™ system has interactive voice control, applicable to a wide range of Bluetooth® phones.
VoiceCom 1000™ Introduction Introduction This Operating Manual for the VoiceCom 1000™ contains all necessary information required to get you familiar with the operation of the VoiceCom 1000™ system installed in your car. Your VoiceCom 1000™ system should have been installed by a professional installer in order to be covered under ROSEN Limited Warranty. The installer may also provide you with the initial training on the proper use and the operation of the VoiceCom 1000™.
Getting Started VoiceCom 1000™ Negative Effects on Road Safety: You are now the proud owner of the most advanced hands-free mobile phone system and will have a safe and very convenient way of operating your mobile phone in your car, however, talking on the phone while driving reduces your concentration! This may cause dangerous situations on the road. Also in handsfree mode you should draw your main attention to the traffic.
VoiceCom 1000™ Interactive Voice Control Interactive Voice Control Your VoiceCom 1000™ features the most advanced interactive voice control system giving you true and complete hands-free operation of your mobile phone while driving. It offers you the possibility of dialing by simply saying the phone number to be dialed, or dialing using preferred names.
Interactive Voice Control VoiceCom 1000™ Note: As a precondition for some voice commands a Bluetooth® enabled phone has to be paired and connected with the VoiceCom 1000™. "Dial Number" After speaking the command "Dial Number", you will be asked "THE NUMBER PLEASE?" You may now speak the number either in single digits, in groups of digits or the entire number in one continuous way. The number of digits you may enter is limited to 20. The moment you pause, the system will repeat to you the numbers spoken.
VoiceCom 1000™ Interactive Voice Control speaker-dependent, so in general the system will only recognize the voice of the speaker, who has programmed the phonebook of the VoiceCom 1000™ system. When the system responds with the name you entered, i.e. "JOHN," you say "Dial" and the system responds with "THE NUMBER IS DIALED," and the connection will be made. In case the system does not recognize your name command it will respond with "ENTRY NOT FOUND," and you should repeat the name entry.
Interactive Voice Control VoiceCom 1000™ say, "THE PHONEBOOK IS FULL" and will not accept your command for a new entry. Should you make an error while inputting the phone number to a name you can say "Delete" and the system will delete the last digit entry and repeat the previous numbers entered, or you can delete the entire previously entered numbers by saying "Delete All" and you start entering the phone number from the beginning.
VoiceCom 1000™ Interactive Voice Control the system's response is "CANCEL" and it exits this dialog. If you say a name and the system responds with "ENTRY NOT FOUND", "THE NAME PLEASE", you may repeat the name entry more clearly, however it may also be the case that the name you try to remove is not stored in the phone-directory. If you are not sure the system said the correct name to be removed, just say, "Repeat" and the name is said again.
Operating the System VoiceCom 1000™ "Store Emergency Number" DO NOT ATTEMPT TO PERFORM THE FOLLOWING PROCEDURE WHILE DRIVING THE CAR! STOP THE CAR AND THE ENGINE A ND PARK I N A SECURE PLACE BEFORE ENTERING INTO THE VOICE CONTROL PROGRAMMING DIALOG! You can store a random number in a reserved location within the VoiceCom 1000™ by saying "Store Emergency Number.
VoiceCom 1000™ Operating the System Bluetooth® Technology Bluetooth® technology is radio technology and therefore allows wireless communication. Data and voice can be transmitted simultaneously. This does not require any line-of-sight connection between the participating devices. The typical radio range in a free sound field is 10m (appr. 30ft.). However, interference from other electrical devices or obstructions may reduce the range.
Operating the System VoiceCom 1000™ strength of the signals received by the phone and the phone‘s remaining storage battery capacity. Various status messages are shown in the middle of the display. Voice control active Registered in the network Pairing Connection set-up Phonebook available No call active If there is a Bluetooth® connection with a paired phone, the name of the phone or of the service provider can be seen here.
VoiceCom 1000™ Operating the System Settings • Language Select the menu language you wish. Choose "auto" so that the menu language will correspond to the voice-command control version in the control unit. • Display brightness Regulate the brightness in the display to the level which suits you best.
Operating the System VoiceCom 1000™ • <> The points marked with < > are placeholders for phones not yet paired and they cannot be selected therefore. • "< Device name >" The name of a paired phone. You can only select this menu item if the adapter is not connected via Bluetooth® to the paired phone at the moment. • Connect Tries to set up a Bluetooth® connection with the paired phone. • Delete It deletes the phone from the list of paired devices.
VoiceCom 1000™ Operating the System The phone then starts device recognition. In the list of the devices found by your phone, select " VoiceCom 1000™". In the course of the procedure of pairing your phone you will be asked to input your PIN or code (also passkey). Please enter the digit sequence "1234" then. After a short time the phone should report that the device has been paired. You can also abort the pairing at any time by pressing the "right" key.
Operating the System VoiceCom 1000™ Making a call Depending on the phone you have, some functions might not be available when you use the headset profile. If there is no connection, then the hands-free functions cannot be used. Please therefore be sure the Bluetooth® connection is established. You can dial a number by voice dialing, by pressing keys on the phone or directly from the phone book.
VoiceCom 1000™ Ready to use your VoiceCom 1000™ Transferring a call from the hands-free system to the VoiceCom You can transfer an active call from the hands-free system to the telephone in order to avoid third parties listening in, for example. To do this, press the left key for more than half a second. Press the left button again to transfer the call back to the hands-free system.
Support VoiceCom 1000™ Support Customer support and product assistance is available by e-mail: techelp@rosenentertainment.com. If you would like to speak to a ROSEN technical support representative, please call on weekdays between 8 am and 5 pm pacific time ROSEN hotline: (888) 883-2790. One of our technical support representatives will be glad to assist you.
VoiceCom 1000™ Troubleshooting Troubleshooting Should you experience problems with the operation of your new VoiceCom 1000™, please try the troubleshooting suggestions below: Problem Solution The VoiceCom 1000™ blue doesn't turn on with the ignition turned on. Check the battery power fuse and if necessary replace with 2 Amp fuse. Consult your professional installer. When using the VoiceCom 1000™ system for a phone call, the person on the other end cannot hear you.
Troubleshooting VoiceCom 1000™ Problem Solution The paired phone is not connected when the ignition is turned on. Bring the phone within range of the Remote Control. Switch Bluetooth® on within your phone (the" automatic" option is not enough). Confirm the connection on the phone. Disable the security lock (see operating instructions with the phone). Delete the respective device from the list of paired devices and start the pairing process again.
Visit us at www.rosenentertainment.com © ROSEN. All rights reserved. ROSEN and VoiceCom 1000™ are trademarks of ROSEN.
