Installation guide

Installation Guide GM Series
Rosen Entertainment Systems Copyright 2010 All Rights Reserved
Multi-Media Navigation System Installation Guide DP-GM1014 Rev A
Page 3
Identify the Vehicle Audio System
The first step you need to complete
Is to CONFIRM the Vehicle Audio System before you proceed. The Rosen Nav Systems are
specifically designed to be CONFIGURED to work in appropriate vehicles.
STEP
1b
USING THE RPO CODES
You can use the Regular Production Order (RPO) Codes to
determine the Audio Platform Type. These codes, along with
the Vehicle Trim can be used as noted below.
THE RPO CODES
You will find the RPO Codes located in the Glove Box
These Codes and the Trim Level
of the Vehicle are needed to
identify the Audio Platform Type.
(
Note
: RPO codes are in Alphabetical order from Right to Left)
BUICK
:
Enclave
Trims With RPO Without RPO
Non-Amp > CX, CXL PCU or UUJ
Std-Amp > CX, CXL PCU or UUJ
Use
Harness
DP-GM1016
DP-GM1012
Installer
Setting
OFF
OFF
CHEV
:
Suburban /Tahoe/Silverado/Traverse/Avalanche
Trims With RPO Without RPO
Non-Amp > LS, LT UQA
Std-Amp > LS, LT UQA
Std-Amp > LTZ UQA
CenterPoint > LTZ UQA
Use
Harness
DP-GM1016
DP-GM1012
DP-GM1012
Installer
Setting
OFF
OFF
ON
GMC:
Acadia / Denali* / Yukon / Sierra
Trims With RPO Without RPO
Non-Amp > SL, SLE UQA
Std-Amp > SL, SLE UQA
Std-Amp > SLT UQA
CenterPoint > SLT UQA
Use
Harness
DP-GM1016
DP-GM1012
DP-GM1012
Installer
Setting
OFF
OFF
ON