Installation guide

8
3. Operation
VIDEO control keys：
6 5 4 3 2 1
1. Power：When you push this button, it will turn ON or OFF the LCD
power.
2. V1：Video input 1. When you push this button, it will show the picture
from the source unit connected to video input 1.
3. V2：Video input 2. When you push this button, it will show the picture
from the source unit connected to video input 2.
4. MENU/SELECT
：
When you press this key, a menu will appear. Use the +
and – keys to highlight menu selections. When the desired selection is
highlighted, press the MENU/SELECT button again to change to that
selection.
5.
┼
：When you push this button, you will move
up
in a menu, or
increase
the value of the setting you have selected.
6.
– ：When you push this button, you will move down in a menu, or
decrease
the value of the setting you have selected.