Specifications
Rosen Aviation 10.6” HD Widescreen Bulkhead Display
Document Number: 106282
Revision: D
Date: 03/20/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 23 of 30
6.6.1. Momentary Mode
Momentary enables you to specify those sources that will be set to On or Off. This mode
also contains an option to specify an Auto Detect source.
If the source specified in the Auto Detect option is connected, the display will ignore all
source commands. If Auto Detect is set to None Selected, the monitor will return to
normal momentary operation.
Highlight TechnicianSource Mode and press ENTER. Momentary is the default
Source Select option. If Source Select is set to Constant, highlight Source Select and
press ENTER. Use the ▲▼ buttons to switch to Momentary, and then press ENTER.
Use the ▼ to select Auto Detect, and then press ENTER.
Select which video input will be auto-detected and then press ENTER.
Use the arrow buttons to turn the other video inputs On/Off and then press ENTER.
Press EXIT when you are ready to exit the OSD.
Figure 21 Source Mode Momentary settings
Set Auto Detect to
None Selected if
Source Select will be
in Constant mode