Specifications

Rosen Aviation 10.6” HD Widescreen Bulkhead Display
Document Number: 106282
Revision: D
Date: 03/20/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 11 of 30
Pillar Box: A standard 4:3 source image will appear with vertical black bars on the left
and right side of the image. If the image source is letterboxed, then there will also be
horizontal bars at the top and bottom of the image as well.
Letter Box Expanded: Expands the source video in the vertical and horizontal
dimensions to fill the display screen. Letterbox-format DVDs will have small or no bars
showing in this mode, while 4:3 aspect video sources will expand beyond the screen
boundaries and appear cropped.
Note: This mode is not available for RGB or a graphic, PC-based HDMI/DVI source.
5.2.3. Scheme
There are two default color settings or schemes: Natural and Vivid. If the screen colors
are not what you expect, select Scheme and press the ▲▼ buttons to toggle between
the settings. The background picture’s colors change as you toggle between the settings.
Vivid uses a higher color saturation level above the Natural level.
Try both schemes to determine which one you like best before adjusting the other picture
quality settings.
Select UserScheme and then press ENTER to access the settings.
Select the setting and press ENTER to accept the changes, and then select Back and
press EXIT to close the OSD.
5.2.4. Source
(Available only when Operation Mode is set to Standard) The Source page lists all of the
available sources and shows which source is currently selected.
Figure 7 User Sources
Select UserSource and press ENTER to access the settings.
To switch the source, press the ▲ and ▼ buttons.
Press ENTER to accept any changes, and press ◄ to remain in the OSD or EXIT to
close the OSD.
To switch sources directly from the remote control, close the OSD and press the
SOURCE button twice for each input.