SURROUND SOUND RES R VIDEOGAMES wireless .
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Frequently Asked Questions……………………………………………………………………………………………...……………………………………..........….22 DVD Player Setup Options………………………………………………………………………………………………..…………………………..........…………….20 Managing Black Bars………………………………………………………………………………………………………………………………………..........…..…..18 Using External Sources…………………………………………………………………………………………………………………………………..........……...….18 Using the Integrated Game System……………………………………………………………………………………………………………………...........………...
6 Press here to open Power Button With both hands on the headrest move the headrest to get the correct angle for viewing. Once you have the correct viewing angle use the POWER button on the front of the display to turn on the system. Each headrest must be turned on independently. To adjust the angle of the screen and switch on the system: Make certain that the remote, the headphones, and the game controller have fresh batteries properly installed. 1 Press SOURCE until “TV Tuner” appears on the screen.
DVD Slot Reset Button Front Panel Control Eject Button Console-mounted Input Jack Locations Press here to open and expose the DVD slot Front View Play/Pause Mode/Source Input AUX 7 Speaker Sound Control Infrared Censor Enter Next Chapter or Previous Chapter or Track/Navigation Track/Navigation Left Navigation Down Right Power Navigation Up The Front Panel Controls 1 Make sure MUTE is off. Press SPEAKER on the front panel of the system and “SPEAKER SOUND ON FM _ _ .
Two (2) built-in DVD/CD/MP3 players. Two (2) independent wireless game controllers. Two (2) wireless infrared two channel headphones. Remote control. Interface module with built-in wireless FM Transmitter (FMT). Monitor cables and power harness. · · · · · · 8 Two (2) fully integrated custom headrests. · Your system includes the following components: Each headrest can be used independently or they can be used together.
Why the system doesn’t respond the same way to all discs DVD Regions DVD Region Icons ALL 1 1 4 6 Region 1: U.S. and U.S.
32 32 32 32 10 Note: See Page 12 for more on adjusting the Brightness setting. To exit the menu: Press the DISPLAY button to save settings and exit. To change the value of a setting: Use the LEFT and RIGHT arrow buttons. The range is from 0 to 63. To select a setting to be changed: Press the DOWN arrow button to move the cursor down the menu list. Once you have selected the item to change, use the LEFT and RIGHT arrows on the remote or the front panel to adjust the settings.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 System Menu Zoom Navigate Left Enter Navigate Right Display/Picture Setting Setup Navigate Down Disc Menu Day/Night Mode Dome Light (Not Active) Output B (Not Active) Note: If you try to perform a DVD action when it is not permitted (such as accessing the disc menu while the disc is loading), there will be no response from the unit. This is normal operation and is not a problem with your system.
Stop Forward/Search 12 Press once to pause playback. Press repeatedly to advance video frame by frame. To resume normal playback, press PLAY. Pause/Frame Step Set the brightness level in daytime conditions with plenty of ambient light. You can use this button to switch between Day and Night modes. (see Page 10) Day/Night 2 24 Press during playback to fast forward. Press the FAST FORWARD button multiple times to adjust search direction and speed. Choose from 2x, 4x, 6x, and 8x.
Up/Down Arrows Left/Right Arrows Enter ENTER Setup SETUP System Menu Pressing this button brings you into the Internal DVD menu. 15 SYSTEM MENU Pressing this button brings up the DVD setup screen (refer to the typical Setup and Configuration). 21 Press to make a menu selection. 18 Press to move left or right in a menu. Also used to change frequencies on the FMT, after the Speaker Sound button is pressed. 17, 19 Press to move up or down in a menu or to change channel when watching TV.
DISC MENU Disc Zoom + + DISPLAY 14 To watch a fullscreen DVD or broadcast television, press until “STANDARD” is displayed. This mode uses most of the screen, but black bars will be visible on the sides, like this: • To view a widescreen DVD, press this button until “WIDE” is displayed on the screen. This uses the full width of the screen. • This button allows you select from the various screen display modes.
When a disc containing MP3, JPEG, or Video CD files is inserted, the following screen appears. Use the arrow buttons to select a file type. MP3, JPEG, Video CD Playback 15 If the words “HEADPHONE SOUND ONLY” appear, the Internal FMT is turned off. It can be turned on by pressing the SPEAKER button and selecting an FM frequency. If the words “SPEAKER SOUND” appear, an external FM Modulator (FMM) is probably being used. In this case, the SPEAKER button turns the external FMM on and off.
The wireless IR headphones require two AAA batteries. To replace the batteries, slide off the battery compartment door on the left earpiece and insert batteries, as shown. Make certain that the battery orientation matches the marks inside the battery compartment. The system comes with two (2) infrared (IR) wireless headphones. These headphones receive a signal from an IR transmitter built into the unit. Headphones allow rear-seat passengers to listen without using the vehicle speakers.
Note: To watch broadcast television or videotapes in their original format, press the DISPLAY button on the remote control until “STANDARD” is displayed on the screen. This will properly size the image, instead of stretching the image across the wide screen. In “STANDARD” mode, you will see black bars on the sides of the image, like this: 3 To scan and store all available channels, press SOURCE. 2 Press the UP and DOWN arrow buttons on the remote to change channels.
Color-Coded RCA Jacks 18 Note: If you want to watch non-widescreen, 4:3 images, press the DISPLAY button on the remote control until “STANDARD” is displayed on the screen. This will properly size the image, instead of stretching the image across the wide screen. In “STANDARD” mode, you will see black bars on the sides of the image, like this: To use an external game system, a 12VDC to 110VAC power inverter, available at most electronic retail stores, is often required.
Note: Best results are obtained by connecting only widescreen displays to the system. The DVD player can provide either widescreen video or standard, non-widescreen video - it cannot provide widescreen video for one screen and standard video for other screens. Your Rosen authorized dealer offers a selection of high-quality widescreen automotive displays. 19 Press the DISC ZOOM button during playback to select among the available options.
20 Note: To access the Preferences page, you must completely stop playback of any loaded disc, or eject the disc completely. If you try to perform an action that is not permitted or not permitted while a disc is playing, this on-screen symbol will appear: EXIT SETUP GENERAL SETUP SPEAKER SETUP AUDIO SETUP PREFERENCES SETUP MENU -- MAIN PAGE 1 Press SETUP. 2 Use the UP and DOWN navigation buttons to highlight a selection. 3 Press the ENTER button to confirm your selection.
To change the on-screen display language, select GENERAL and OSD LANGUAGE. EXIT SETUP GENERAL SETUP SPEAKER SETUP AUDIO SETUP PREFERENCES SETUP MENU -- MAIN PAGE Note: Not all language settings are supported by all discs. Several language settings can be customized on the DVD Player. These languages can vary depending on the language supported by the DVD disc. To change these settings, select the PREFERENCES page. Changing Language Settings The factory set Parental Control password is 3308.
22 To play MP3 discs without the “Smart Nav” on-screen menu display, select PREFERENCES, then SMART NAV. Deactivating the “Smart Nav” MP3 OnScreen Menu Display Note: If CAPTIONS is set to OFF, the SUBTITLE button will be defeated from working. If SUBTITLE OFF is selected under Preferences - Audio, then the SUBTITLE button can still enable subtitles during playback, as long as CAPTIONS is set to ON. To enable or disable captions or subtitles, select GENERAL and CAPTIONS.
MY PICTURE FREEZES Damaged or incompatible DVDs will cause the system to freeze and lock up the System. Solution: Check and clean the DVD as needed. Solution: Replace the DVD if scratched, cracked or warped. Solution: Confirm the DVD is a compatible format. (see page 9) Solution: Reset the system. (see page 22) I DO NOT HAVE HEADPHONE AUDIO The headphone audio should be preset at all times, unless MUTE is on, or a DVD Setting has been changed in the DVD Settings Menu.
24 PARENTAL: PASSWORD: SMART NAV: OFF 3308 No menu, with menu LOCALE: CHINA, FRANCE, HONG KONG, JAPAN, TAIWAN, GBR, USA The factory default options are given in bold type.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, electronic, mechanical, recording or other means without prior written permission from Rosen. RES PN 9100685-90 Rev A © 2006 Rosen Entertainment Systems www.rosenentertainment.
